The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Resize New straight wall brass?Go | New | Find | Notify | Tools | Reply | |
| Resize New straight wall brass? | Login/Join |
| one of us |
Do you full length size brand new straight wall brass cases/44magnum,etc. cases or just bell the mouth and load 'em up? | ||
|
| One of Us |
I size them, but that's me. Before I started that, I had one batch that didn't hold the bullet like they should. | |||
|
one of us |
load and shoot em as long as they chamber a good crimp will hold the bullet | |||
|
| One of Us |
I would. Then you know... | |||
|
| One of Us |
When handguns were legal here I shot a lot of 38 Special and 44 Magnum plus the other "usual suspects" of 455 Webley etc., etc.. I always put new factory brass through the (carbide) re-sizing die when I got it. And use a neck-chamfer too to de-burr inside and out. In fact treated it just as if it were once-fired brass bought in or picked up off the range. As HB say. Then you know... | |||
|
| One of Us |
'spares says,
I feel very badly for you Britishers. To have a fundamental human right taken from you because of one moron is a travesty. In a perfect world, I'd like for you to come to America, become an American and regain your Freedom... | |||
|
one of us |
I size, to get them round, then chamfer. Often new brass will have a decent burr on the case mouth & be out of round.. LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
Moderator |
every time .. i resize all new brass ... too many bent mouths .. opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
More often if it said "R - P" on the headstamp! Less often if it said "W - W"! | |||
|
| One of Us |
Full length, every time, old or new. NRA Life Endowment Member | |||
|
One of Us |
+1 Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Resize New straight wall brass?
Visit our on-line store for AR Memorabilia