THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Need 376 Steyr Data
 Login/Join
 
One of Us
Picture of dpcd
posted
I am building two 376 Steers; none of my books has reloading data for it. So if you could send me a page from the Hornady book, if it is in there, I would appreciate it. I have a plethora of powders. Nice alliteration, isn't it?
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
great round
https://www.chuckhawks.com/376...20with%20300%20grain

the load that Chuck gives just plain works

one can run the 225 much faster


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Thank you; yes it does seem to be a great round, and the real forte is that it fits into any action (ok, it fits in Mausers) without length modification. Slight bolt face open up (.020)
The Back 40 just introduced it to me, and now I have to make two of them. Waiting on the reamer.
Plenty of power. Doesn't seem to be any drama. And I like the 375 bore.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
My Apple won't let me into the site; says it is full of viruses. I don't know about computers to circumvent that.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
270 GR. HDY SP
Starting LoadsMaximum Loads
Manufacturer Powder Bullet Diam.
C.O.L. Grs.
Vel. (ft/s)
Pressure
Grs.
Vel. (ft/s)
Pressure
Hodgdon Varget 0.375" 3.060" 61.0 2,446 50,000 PSI 65.5C 2,610 60,100 PSI
Buy Now
Hodgdon BL-C(2) 0.375" 3.060" 64.0 2,447 47,000 PSI 66.0 2,544 53,100 PSI
Buy Now
Hodgdon H335 0.375" 3.060" 56.0 2,388 50,700 PSI 60.0 2,547 59,900 PSI
Buy Now
Hodgdon H4895 0.375" 3.060" 58.0 2,459 52,700 PSI 62.0C 2,580 59,400 PSI
Buy Now
Hodgdon Benchmark 0.375" 3.060" 55.0 2,400 50,500 PSI 59.0 2,549 59,500 PSI
Buy Now
Hodgdon H322 0.375" 3.060" 53.0 2,382 50,800 PSI 57.0 2,517 59,600 PSI
Buy Now
BULLET WEIGHT
300 GR. SFT SP
 
Posts: 304 | Location: Minnesota | Registered: 12 February 2007Reply With Quote
One of Us
posted Hide Post
Hodgdon has data for it.

http://www.hodgdonreloading.com/data/rifle


Old Corps
Semper Fi
FJB
 
Posts: 828 | Location: South Pacific NW | Registered: 09 January 2021Reply With Quote
one of us
posted Hide Post
Jeff talked me in to building one years back, cool round. Hard to make feed but can be done.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Thanks craig, tj.
I guarantee it will not be hard for me to make it feed.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by dpcd:
I am building two 376 Steers; none of my books has reloading data for it. So if you could send me a page from the Hornady book, if it is in there, I would appreciate it. I have a plethora of powders. Nice alliteration, isn't it?


64.5g Varget 270g TSX = 2560 fps in a 24" Douglas tube on a VZ-24 (way easy to make feed) 3/4 moa @ 100yds tu2
I have a reamer & headspace gages if you cant find one. tu2
 
Posts: 2361 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Thanks very much; I have a reamer. And yes, I have brass and can see it will be easy to make feed.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by dpcd:
My Apple won't let me into the site; says it is full of viruses. I don't know about computers to circumvent that.


quote:
The .376 Steyr

By Chuck Hawks


.376 Steyr
Illustration courtesy of Hornady Mfg. Co.
Hornady and Steyr introduced the .376 Steyr in 2000 as a joint development. Steyr initially chambered the .376 in a big bore version of their Scout Rifle with a 19" barrel. (Shades of Remington's .350 Mag./Model 600M combination of 1964!)

Hornady factory loads come with 225 grain (BC .320, SD .229) and 270 grain (BC .380, SD .274) Spire Point Interlock bullets. The 270 grain bullet is loaded to a nominal muzzle velocity (MV) in a 24" test barrel of 2610 fps with muzzle energy (ME) of 3990 ft. lbs. The 225 grain bullet is a reduced power (and recoil) load and also features an advertised MV of 2610 fps with ME of 3325 ft. lbs.

According to Hodgdon reloading data, handloaders can equal the performance of the Hornady factory load giving a 270 grain bullet a MV of 2610 fps using 65.5 grains of VARGET powder, and achieve maximum velocities of about 2910 fps with the 225 grain bullet in front of 68.5 grains of H335, and 2388 fps with 300 grain bullets in front of 59.5 grains of H4895. All loads were developed in Hornady cases using Federal 215M primers, and all loads developed pressures right around 60,000 cup. For African conditions, where excessive heat can cause considerable increases in chamber pressure, it might be wise to reduce those loads.

The Sixth Edition of the Hornady Handbook of Cartridge Reloading shows that 59.4 grains of H4895 will give their 225 grain Spire Point bullet a MV of 2600 fps. 56.3 grains of the same powder will drive their Spire Point or RN 270 grain bullets at a MV of 2400 fps. These would be more reasonable hunting loads in much of sub-Saharan Africa. These loads Hornady cases and Winchester WLR primers and were developed in a 25.5" test barrel.

Note: A complete article about the .376 Steyr can be found on the Rifle Cartridge Page.



opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Awesome; thanks very much.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Hornady data is on it's way via USPS.

Hip
 
Posts: 1899 | Location: Long Island, New York | Registered: 04 January 2008Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Wow that is super nice of you!
Thanks.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I have owned 2. The Barnes 235 grn is scary accurate and being a monometal it penetrates like crazy.

Varget was my powder of choice 66-67 grains.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10164 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by dpcd:
My Apple won't let me into the site; says it is full of viruses. I don't know about computers to circumvent that.


A man of your knowledge, I am surprised you use an Apple!

I use an iphone, and an ipad, but I refuse to use an Apple computer.

My wife and daughter do.

I don't.

Apart from laptops, desk computers I have here are all built by myself.

Learned about computers the same way I learned about reloading.

By doing it yourself.

Generally, on a PC, you get a choice of leaving the "unsafe" site, or continuing to it.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 69162 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Wow, impressive. But I would rather work on guns than computers!
I use an Apple because my daughter had it and when she got a new one, she gave it to me. I think it is a 2009 model. It has had 3 batteries but otherwise, works fine.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
The Barnes 235 grn is scary accurate and being a monometal it penetrates like crazy.



and makes a wounded helicopter sound in ricochet !!!!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
if you like quickload. 270 barnes
oups this is with a 20" barrel


 
Posts: 6522 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
This is very good information too; thanks.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia