Go | New | Find | Notify | Tools | Reply |
one of us |
What is the best source for some 9.3X64 Brass? Looks like the usual places don't stock it.-Rob | ||
|
<Rusty> |
Try Huntington's Huntingtons.com They say they have Lapua. ------------------ | ||
one of us |
Huntingtons doesn't have any cases but they do have dies. The old western Scrounger had one box.-Rob | |||
|
<redleg155> |
Old Western Scrounger gets 9.3x64 brass once a year from Germany (RWS). RWS, as I understand, makes only one short run of these cases each year - about 5-10k of them. If I remember right, July/August is usually the time they arrive here in the States. Just ask OWS when they're expecting the next shipment. Have them put your name on some of the expected shipment. I've never made cases from the belted mag cases - sounds like too much trouble to me. The RWS cases are of very good quality and worth the wait. You might try "Frankonia Jagd." in Germany - a high end retailer of sporting goods. I don't have their contact info, but a net search should yield something and usually on or two guys in their gun rooms can speak decent English - might be worth the troble of a longdistance call... Forgot to add that when I was in Germany and got some 9.3x64 brass, Frankonia didn't have it either. The guy I spoke with said, "wait." So I did. Apparently, he made a few phone calls. When he came back, he asked how much I wanted! redleg [This message has been edited by redleg155 (edited 11-30-2001).] | ||
<ML> |
Hi, normaly those cases are easy to get in Germany. Markus | ||
<Daryl Elder> |
You won't have much luck this side of the pond. Have any German buddies? I got 5 boxes of virgin RWS 9.3x64 without much trouble-- as long as you sprechen ze Deutsche. Pops up at shows sometimes but it usually the old DWM stuff. | ||
One of Us |
I have a ZG-47 coming in chambered for 9.3x64. Anyone know a source for new or used brass? Huntingtons just informed me that the RWS is unavailable. | |||
|
one of us |
Buffalo Arms has some in stock that they make from mag brass. Here's the link: https://www.buffaloarms.com/9-...-9-3x64brenneke.html I'm not connected to BuffArms, but I do like them because they supply lots of oddball shooting stuff. | |||
|
Moderator |
holy Zombie thread, batman opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
What? This thread is ONLY 21 years old. LOL | |||
|
one of us |
I have made 9.3x64 brass from 458 Win or 338 win brass. I used Win headstamped cases and the resulting cases were the same capacity and handled the same loads as the Factory RWS cases. It is not that hard. In a small lathe cut the belt off . Recut the extractor groove and use your shell holder as a go guage. FL size the case,load and fire. The fireformed cases are perfect. sure a lot better than waiting a year or more for factory brass. I had a hundred cases made in a couple hours | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia