THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Dillon XL 650
 Login/Join
 
One of Us
posted
I just bought a used Dillon XL 650. The person that originally owned it had it setup for pistol calibers and did not have rifle dies. I have Lee dies for my rifles and was wondering if these dies can be used in this loader or would I have to buy the Dillon dies
 
Posts: 133 | Location: Southeast | Registered: 18 July 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
No trouble at all
Here is the manual
http://www.dillonprecision.com/#/manuals.html


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
i like the lee carbide dies for a lot of my straight walled revolver cartridges.
i use most everything else as the seat and crimp dies.
i generally like to size and then tumble off press then prime and load on the press.
 
Posts: 5002 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
One of Us
posted Hide Post
thanks
 
Posts: 133 | Location: Southeast | Registered: 18 July 2007Reply With Quote
One of Us
posted Hide Post
The only Dillon die you have to use is the powder die that holds the expander/funnel and mounts the Dillon PM.

Andy
 
Posts: 315 | Location: Arlington TX | Registered: 21 October 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia