one of us
| I had one built with a 9.5 twist and couldnt get bullets under 160 to group worth a damn. it loved 160 grain accubonds. if i were to do it again shooting the bullet weights mentioned, i would go with a 1in10 and have the length finished at 28 inches. good luck! |
| Posts: 485 | Location: Boise, Idaho | Registered: 17 January 2001 | 
IP
|
|
one of us
| I have two 7mmstw's with - in 10".Both deliver 1/2" groups with 140gr bullets with 3500fps muzzle velocity.I have never tried 160's.The barrels are a #3 schneider and a #4 kreiger both 26". |
| Posts: 3104 | Location: alberta,canada | Registered: 28 January 2002 | 
IP
|
|