Go | New | Find | Notify | Tools | Reply |
one of us |
71gr. of Ramshot Hunter, 165gr Nosler Partition, Win brass, Fed 215 primers. Avg. velocity 3150, sub MOA in my Browning BAR/BOSS. | ||
|
one of us |
140 Barnes XBT moly coated over 72.0 grains RL-19 CCI-250M WW case MOA or better out of my 24" Encore and the neighbors Win M70. | |||
|
one of us |
165 grain swift scirocco, 71.5 grains rl-19, cci magnum primer. shoots ragged hole groups out of my savage 12bvss. | |||
|
one of us |
Merry Christmas! I just finished working up loads for a new Winchester Model 70 chambered for the 300WSM and settled on the following: Winchester case Fed 215M primer 68 grains IMR 4831 180 grain Nosler Partition velocity = 3052 fps groups = an even inch in this rifle R F | |||
|
one of us |
Cwilson, I think you'll like your Kimber, I've got one, it's a little light and you'll feel it when you set it off, but mine and one my buddy has sure shoot well. Pay attention to your scope when you set it up, the bolt gets real close to the scope when you throw it, I've banged my finger a few times. My load for 150 gr CT/Nosler Ballistic tips works well in all of my 300 WSM's, it is: WW case, Winchester Large Rifle Magnum primer 67 grains of Win 760 COL 2.825" Good luck, and Happy Christmas to yourself! Regards--Don | |||
|
one of us |
71.5 grains of IMR4631 under a BArnes 150 TSX gives me sub MOA 59 grains of Reloader 15 topped with a Barnes 168 grain xlc does also This is out of a stainless A-bolt Simdow | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia