THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re: " 30/06 PRESSURE DATA - H 4350@ 180 GN N/P"
 Login/Join
 
one of us
posted
Quote:

BOB
sorry it has taken me so long to reply but ive just come back from holidays the pressure data was obtained from a fully blown ballistic lab at the Australian defence industries its on par with any other lab in the world< !--color--> ....the gun they use there is one with a universal reciver and the pressure is obtained via a transducer NOT a strain gauge
drop me a line if i can be of any help
regards daniel




VERY COOL!!!! Thanks for sharing this load info with the forum!

-Bob F.
 
Posts: 3485 | Location: Houston, Texas | Registered: 22 February 2001Reply With Quote
one of us
posted Hide Post
DENTON
these off set values are already included as part of the data ....however i will double check for you and will post it here in the next day or so /and will e mail you
regards daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
one of us
posted Hide Post
Cool Stuff. Keep posting it
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
one of us
posted Hide Post
DENTON
just double checked for you ...the off set figures are already included in the data that is charted for both the brass ,and the chronagraph being a few meters down range
there is also another set of figures that are further used and that is SAMMI REFRENCE AMMUNITION which is loaded to a certain velocity/pressure and depending upon the vel/pressure this data can also be included as a correction factor ....but for simplicity sake i have decided not to go that way
regards daniel
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia