14 December 2004, 11:14
BFaucettRe: " 30/06 PRESSURE DATA - H 4350@ 180 GN N/P"
Quote:
BOB
sorry it has taken me so long to reply but ive just come back from holidays the pressure data was obtained from a fully blown ballistic lab at the Australian defence industries its on par with any other lab in the world< !--color--> ....the gun they use there is one with a universal reciver and the pressure is obtained via a transducer NOT a strain gauge
drop me a line if i can be of any help
regards daniel
VERY COOL!!!! 
Thanks for sharing this load info with the forum!
-Bob F.
14 December 2004, 23:40
M 98DENTON
these off set values are already included as part of the data ....however i will double check for you and will post it here in the next day or so /and will e mail you
regards daniel
15 December 2004, 06:10
GSP7Cool Stuff. Keep posting it
20 December 2004, 01:54
M 98DENTON
just double checked for you ...the off set figures are already included in the data that is charted for both the brass ,and the chronagraph being a few meters down range
there is also another set of figures that are further used and that is SAMMI REFRENCE AMMUNITION which is loaded to a certain velocity/pressure and depending upon the vel/pressure this data can also be included as a correction factor ....but for simplicity sake i have decided not to go that way
regards daniel