THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Dakota reloading info
 Login/Join
 
One of Us
Picture of cmfic1
posted
Does anybody know of a website, where a guy can get some reloading info on the Dakota Magnums? as well as a link where you can compare them to other belted magnums?


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Hornady has data for Dakota mags in their manual.

have you checked hodgdons website?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
One of Us
Picture of El Deguello
posted Hide Post
quote:
Originally posted by vapodog:
Hornady has data for Dakota mags in their manual.


So does Barnes. O/A, I find that ballistically the .300 Dakota is no great improvement over the .300 Win. Mag.


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
 
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
Thanx guys. The Hodgdon page has nothing on the cals. I am looking for, and my Barnes book doesnt either. I guess I should state that I already have .280 Rem, 300 WM, 338 WM, .450 Marlin and a .416 Rem. Mag (that I am selling) and that I am looking at getting a rifle built in either a .375 Dakota, a .404 Dakota, or a .416 Dakota. But before doing so, I would like to have a good comparison between the three.
Thanx again guys.


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
one of us
Picture of fredj338
posted Hide Post
As Vapo said, Hornady has data for the Dkaota rounds. I have been shooting a 7mm Dakota for a few years, they are a nice step up over the std. mags w/o going to a RUM or long belted mag. Of the 3 you are looking at, not sure what you want the round for, but I would go .416 Dakota.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
posted Hide Post
What bullet wieght and caliber are you looking for? I can get you pointed in the right direction.
 
Posts: 428 | Location: Bozeman, MT | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Dakota has lots of reloading data.
bigbull
 
Posts: 408 | Location: CANADA | Registered: 06 April 2004Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
elkhunter I am looking for all hunting loads for the above 3 chamberings. I appreciate it.


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
posted Hide Post
I picked out one of the fastest powders from a mid weight bullet for each caliber to give you an idea of what each is capable of. These are max loads. I am not going to list every load from each caliber. The Hornady book doesn't list a .404 Dakota. My typing sucks and i'm dislexic so make sure you check a loading manual before you actually load anything or risk blowing yourself up.

375 Dakota 270 Gr SP, 80 gr IMR 4350, Vel 2800

416 Dakota 400 gr RN, 107 gr H4831, vel 2600
 
Posts: 428 | Location: Bozeman, MT | Registered: 04 January 2005Reply With Quote
one of us
Picture of Ol Bull
posted Hide Post
I have a custom 9.3 x .375 Dakota. With 91gr of RL19 and a 250gr North Fork i get 3050fps and groups under .300" Barrel is a 25" Kreiger


" If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or your arms. Crouch down and lick the hand which feeds you. May your chains set lightly upon you, and may posterity forget that ye were our countryman " Samuel Adams, 1772
 
Posts: 1117 | Location: Helena, MT, USA | Registered: 01 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia