THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Small base dies
 Login/Join
 
<Rayzor25>
posted
Hey guys! What is the purpose of "small base dies"? Is it a full sizer? Or to be used with a neck sizer?Made for semi's with tight chambers?Thanks in advance, Rayzor25
 
Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Rayzor25:
Hey guys! What is the purpose of "small base dies"? Is it a full sizer? Or to be used with a neck sizer?Made for semi's with tight chambers?Thanks in advance, Rayzor25

Yes the standard press type small base dies are full length dies that are on the small side of saami specs and are for autos and lever guns and others without the force of a bolt to seat the reloaded cartridge in the chamber....they are not always needed for all of these guns...just as you say the large chambered ones....I'm told that some of the PPC "small base" dies don't do the shoulder or neck and just do the base of the case to keep them fitting the fireformed chamber size.....good luck and good shooting!!!
 
Posts: 687 | Location: Jackson/Tenn/Madison | Registered: 07 March 2001Reply With Quote
one of us
Picture of todbartell
posted Hide Post
I've used the SB dies for a BLR 81 & a Win M88, both in 308 Win. They did help in smoothing the chambering process.

[ 09-08-2002, 02:17: Message edited by: todbartell ]
 
Posts: 857 | Location: BC, Canada | Registered: 03 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia