THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
45 acp lead bullets
 Login/Join
 
One of Us
posted
Can one load lead, non plated, non jecketed in 45acp cases.
Am wondering if they feed into chambers properly.


NRA Patron member
 
Posts: 2656 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
I run 200 and 225gr SWC through my Kimber all the time. Never had any issues at all.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
posted Hide Post
yes, the oregon trail bullets are good

Back when the .45 ACP was competitive in IPSC people shot millions of the H&G 68 copy bullets a year
 
Posts: 572 | Location: Escaped to Montana  | Registered: 01 March 2004Reply With Quote
one of us
posted Hide Post
Yes the 45acp is almost made to shoot cast bullets in they work great.

Even better when you cast your own for very cheap.
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
what firearm? cast lead is not recomended for polygonal rifled barrels.
 
Posts: 101 | Registered: 07 August 2009Reply With Quote
One of Us
posted Hide Post
I cast my own 230 gr found nose bullets and they feed just fine in my Taurus PT1911.
 
Posts: 669 | Location: NW Colorado | Registered: 10 December 2007Reply With Quote
One of Us
posted Hide Post
Thanks guys
Lead it is
loading for a Smith M&P


NRA Patron member
 
Posts: 2656 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
One of Us
posted Hide Post
If you have a feed problem. Polish the feed ramp.
 
Posts: 63 | Registered: 06 June 2011Reply With Quote
One of Us
posted Hide Post
Can some other type be used?
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
Picture of TEANCUM
posted Hide Post
I shoot 95% of my 45ACP loads with cast lead bullets.

It does take more care when reloading with OAL and any bulges that may appear.

As stated, Glock discourages the use of lead bullets as well as ANY reloads to be fired through their barrels. My experience is that some Glock barrels are ok with lead bullets and others will lead up fast. Best to experiment if you are shooting a Glock and visually review the results.

Some guys will move on to aftermarket barrels with more standard cut rifling and I've done that with two of my Glocks. I bought KKM after a couple of disasters with Lone Wolf Barrels.
 
Posts: 1788 | Location: IDAHO | Registered: 12 February 2005Reply With Quote
one of us
posted Hide Post
Where do you get KKM barrels from?


sputster
 
Posts: 762 | Location: Kansas | Registered: 18 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia