THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Forster Co-Ax
 Login/Join
 
new member
posted
Question for those who own a Forster Co-Ax.

I recently received a Co-Ax and upon opening the box, found that the hole in the yoke where the handle is installed is off center and that the casting is pretty poor quality as the wall thickness is not consistent (the one side is half the thickness of the other). For the price of the press I am considerably dismayed at this quality issue.

Is yours the same way or did I get a lemon?

Thanks.......

 
Posts: 1 | Location: Stephens City, VA | Registered: 18 September 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Mine is slightly off center also...doesn't affect the operation of the press.


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10064 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
It is more likely a milling fixture and tooling point issue. The fixture locates the part from one side rather than locating on the barrel section of the casting.
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
One of Us
posted Hide Post
The unfinished casting surface (the outside diameter) is not a viable reference point for centering the handle bore. Even if it was, as Mike said, the off-center handle bore would have no effect on press performance.

Forster pays attention to things that affect performance, not useless cosmetics.

Andy
 
Posts: 315 | Location: Arlington TX | Registered: 21 October 2005Reply With Quote
One of Us
posted Hide Post
It makes no difference whatsoever.

You will love the press.
 
Posts: 3427 | Registered: 05 August 2008Reply With Quote
new member
posted Hide Post
454, send it to me for quality testing.


Keep your powder dry.
 
Posts: 3 | Location: Right here. | Registered: 14 January 2007Reply With Quote
one of us
Picture of Doc
posted Hide Post
it will have no effect on loads. I have one and it is sweet.


Ted Kennedy's car has killed more people than my guns
 
Posts: 7906 | Registered: 05 July 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia