The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 7.65mm french long masGo | New | Find | Notify | Tools | Reply | |
| 7.65mm french long mas | Login/Join |
| new member |
Can anyone tell me what tool to use, to turn down the rim of a .32 S&W long. To use it in a 7.65mm french mas? Thank you breeze15 | ||
|
One of Us |
I know some guys who use there re-sizing die to swage it down. But I am unsure how good that is. I be leave you can contact compinys like RCBS and they will help out. They may make a die for such a job. Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| new member |
Thank's James | |||
|
| One of Us |
hope it helps fill me in on how it goes Dylan also makes such dies if I remember right and they have a power head on them to trim the brass in the case when resizing. Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| One of Us |
http://www.dillonprecision.com...m_1200B_Case_Trimmer this is the trimmer I speak of damn it took me some time to dig it up Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| new member |
Thank's for all your help James. It looks like I can buy the brass at. http://www.gadcustomcartridges.com/ | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia