The Accurate Reloading Forums
7.65mm french long mas
05 February 2009, 17:14
breeze157.65mm french long mas
Can anyone tell me what tool to use, to turn down the rim of a .32 S&W long. To use it in a 7.65mm french mas?
Thank you
breeze15
05 February 2009, 20:40
James KainI know some guys who use there re-sizing die to swage it down. But I am unsure how good that is. I be leave you can contact compinys like RCBS and they will help out. They may make a die for such a job.
Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
06 February 2009, 05:58
breeze15Thank's James
06 February 2009, 06:19
James Kainhope it helps
fill me in on how it goes
Dylan also makes such dies if I remember right and they have a power head on them to trim the brass in the case when resizing.
Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
06 February 2009, 06:38
James Kainthis is the trimmer I speak of
damn it took me some time to dig it up
Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
09 February 2009, 05:30
breeze15Thank's for all your help James. It looks like I can buy the brass at.
http://www.gadcustomcartridges.com/