THE ACCURATERELOADING.COM TROPHY ROOM FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Backing- plywood question
 Login/Join
 
One of Us
posted
I’m in the process of remodeling my garage/shop at a house I just bought. I’ve decided to frame a room to put my mounts.

I’m going to nail plywood to the studs on two of the walls. Then I’ll hang 1/2” drywall (the two walls are interior).

I’m thinking that I need to use 3/4” plywood . I do not think that the 15/32” is enough? What do you think?

By the way, I’ll be hanging medium sized shoulder mounts
 
Posts: 2665 | Location: Utah | Registered: 23 February 2011Reply With Quote
one of us
Picture of JBrown
posted Hide Post
quote:
Originally posted by Jason P:

I’m going to nail plywood to the studs on two of the walls. Then I’ll hang 1/2” drywall (the two walls are interior).

I’m thinking that I need to use 3/4” drywall. I do not think that the 15/32” is enough? What do you think?


I’m guessing you meant 3/4” plywood, not drywall?

For medium sized mounts I would think that 15/32 would be fine, but 3/4 would give you the option of hanging heavier mounts.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
One of Us
posted Hide Post
I used the 3/4 plywood and it works great. I still found studs for big stuff like eland buffalo and elk.


DRSS
 
Posts: 627 | Location: OK USA | Registered: 07 June 2009Reply With Quote
One of Us
posted Hide Post
Thanks guys, I will go with 3/4”. I do have my wife’s elk and my kudu that’s I’ll hang
 
Posts: 2665 | Location: Utah | Registered: 23 February 2011Reply With Quote
One of Us
Picture of DLS
posted Hide Post
When I built my room, we sheeted all walls with 3/4” plywood, covered with Sheetrock. I’ve hung fairly heavy mounts anywhere and everywhere with no problems for 32 years.

The heaviest, wall-load wise, is probably a leopard laying on an artificial log that juts straight out from the wall. It’s a pretty heavy mount to begin with and the end of the log is about 7 feet from the wall. No problems with it ever.

Be sure to mark where your studs are before attaching plywood as it’s much easier to hit a stud for a really heavy mount if they are pre marked.
 
Posts: 3939 | Location: California | Registered: 01 January 2009Reply With Quote
One of Us
posted Hide Post
I do artwork mostly now but was a building contractor for 30+ years. I've done a couple of trophy walls for folks; 1/2 inch OSB works fine, far less expensive than 3/4 ply. I would however place the studs at 12 inch on center, I did this for kitchen cabinet installations and it also worked very well for some really heavy mounts as it significantly increases the number stud anchor points. Anchored with T-25's into the studs and "ain't nothing coming" of that wall. Works very well in our offices, you can hang virtually anything anywhere you feel like it.
 
Posts: 763 | Location: Montana | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Jason:

Just a little suggestion.

Go with screws instead of nails.

Sounds good otherwise, have fun
doing it. Enjoy the results.

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 6066 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
One of Us
posted Hide Post
Thanks George and thanks to everyone else.

My shop/garage is now in the process of being sheet rocked I went with the heavier OSB and I think that it will work very well.
 
Posts: 2665 | Location: Utah | Registered: 23 February 2011Reply With Quote
One of Us
Picture of buffybr
posted Hide Post
quote:
Originally posted by georgeld:
Jason:

Just a little suggestion.

Go with screws instead of nails.

Sounds good otherwise, have fun
doing it. Enjoy the results.

George

Especially if you use OSB instead of plywood. Nails will push out the back of the OSB chips which weakens their holding power, where screws in pre-drilled holds will tighten the OSB chips and have a stronger holder power.


NRA Endowment Life Member
 
Posts: 1640 | Location: Boz Angeles, MT | Registered: 14 February 2006Reply With Quote
One of Us
posted Hide Post
I am certainly going with the screws.
 
Posts: 2665 | Location: Utah | Registered: 23 February 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Paul Tunkis:
I do artwork mostly now but was a building contractor for 30+ years. I've done a couple of trophy walls for folks; 1/2 inch OSB works fine, far less expensive than 3/4 ply. I would however place the studs at 12 inch on center, I did this for kitchen cabinet installations and it also worked very well for some really heavy mounts as it significantly increases the number stud anchor points. Anchored with T-25's into the studs and "ain't nothing coming" of that wall. Works very well in our offices, you can hang virtually anything anywhere you feel like it.


I'd spend the few extra dollars and use 1/2 " plywood. OSB doesn't nearly hold screws as well.

Grizz


When the horse has been eliminated, human life may be extended an average of five or more years.
James R. Doolitle

I think they've been misunderstood. Timothy Tredwell
 
Posts: 1682 | Location: Central Alberta, Canada | Registered: 20 July 2019Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I used 5/8 ply and it has worked fine. Nothing wrong with going bigger.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Mike:

Dad used to give me hell for

"too many nails".

Seldom had anything fail though.

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 6066 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
one of us
posted Hide Post
You can always drill a hole and insert a wing anchor; that will work with OSB. I used them for heavy stuff that didn't line up with a stud.


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

 
Posts: 7581 | Location: Arizona and off grid in CO | Registered: 28 July 2004Reply With Quote
One of Us
posted Hide Post
Thanks for all the advice. Garage/trophy area is finally done! Nothing fancy but considering what the garage/shop once was, I’m pleased with what it has become.

Going about 8-10 times over the budget but I guess those are the risks you take when you buy an old house!

I just need to hang the animals now!
 
Posts: 2665 | Location: Utah | Registered: 23 February 2011Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia