THE ACCURATERELOADING.COM CAST BULLET FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
12V battery terminals
 Login/Join
 
One of Us
Picture of ted thorn
posted
Recently I was gifted over 100 lbs of brand new battery terminals. They are tightly stacked and still in the factory box's.

Are they an alloy that could be cast for bullets or should I cull them to be sinkers one day?


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7378 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
I would think battery terminals would be good since they are not part of the battery plates.


Shoot Safe,
Mike

NRA Endowment Member

 
Posts: 1022 | Location: Middle Georgia | Registered: 06 February 2011Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
I would think one could find a buyer for such and get a lot more cash value than lead value out of them!



Don't limit your challenges . . .
Challenge your limits


 
Posts: 4292 | Location: TN USA | Registered: 17 March 2002Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
quote:
Originally posted by TCLouis:
I would think one could find a buyer for such and get a lot more cash value than lead value out of them!


These are positive and negative terminals that need to be injection molded into a 12v battery lid.

They have no value outside of manufacturing


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7378 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
one of us
posted Hide Post
I was always under the impression battery terminals/posts were pure lead…yes/no? I’d melt them and cast them.


Shoot straight, shoot often.
Matt
 
Posts: 1210 | Location: Wisconsin | Registered: 19 July 2001Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
OIC, yes, only good to a manufacturer.
How hard are they, I am guessing pretty soft.
Depending on final use you may want to "alloy" them as you melt them or wait and mix whatever is needed for the projies at hand.

I try to melt up a bunch of scrap that of the hardness that I shoot.

Most of mine are about 10.5 15 BHN.



Don't limit your challenges . . .
Challenge your limits


 
Posts: 4292 | Location: TN USA | Registered: 17 March 2002Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
quote:
Originally posted by TCLouis:
OIC, yes, only good to a manufacturer.
How hard are they, I am guessing pretty soft.
Depending on final use you may want to "alloy" them as you melt them or wait and mix whatever is needed for the projies at hand.

I try to melt up a bunch of scrap that of the hardness that I shoot.

Most of mine are about 10.5 15 BHN.


How do you test hardness?


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7378 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
I bet they ain't so soft.
bet they are more like 12 BHN.

there's several ways to test the hardness [but not the content]

make a dent with a scale and a ball bearing.
buy a tool.
smash with a known and guess.
melt some and know the slush and melt point.

test with drawing pencils that have different numbers.
the harder the lead, the harder the pencil needed to dig into it.
 
Posts: 5077 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
Moderator

Picture of Mark
posted Hide Post
Any idea of how old they are? up to 15 years ago most terminals were pretty much all lead but nowadays your guess is as good as anyones. You can especially see this in cable end replacement terminals, some are way too light to have much if any lead at all in them. If there's a date on the boxes of the early 90's or earlier if it looks like lead to you that's what it will be.


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7796 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
quote:
Originally posted by Mark:
Any idea of how old they are? up to 15 years ago most terminals were pretty much all lead but nowadays your guess is as good as anyones. You can especially see this in cable end replacement terminals, some are way too light to have much if any lead at all in them. If there's a date on the boxes of the early 90's or earlier if it looks like lead to you that's what it will be.


Brand new production


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7378 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia