THE ACCURATERELOADING.COM AFRICAN HUNTING FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Re: Ruger 416 Rigby
 Login/Join
 
one of us
posted
PC,

Three will fit in the Ruger, but they will only compress ~ 1 mm down further into the mag. It can be a bit of a bitch to slide #4 over the full magazine, at least in my rifle.

Scott
 
Posts: 1662 | Location: USA | Registered: 27 November 2003Reply With Quote
one of us
posted Hide Post
Mine fits 3 down fine. I would need to have another .300" of room to fit 4 down. 3+1 Rigby is enough.
 
Posts: 273 | Location: Clarks Summit, Pa. | Registered: 17 December 2003Reply With Quote
One of Us
posted Hide Post
In regards to the Ruger & CZ I like Rugers 1/4 rib, but I like cz's action lug for I think there is a little difference in that area. RAB might be able to expand on that. No doubt the Ruger is prettier.

Why am I thinking I need a second cz in .416 Rigby
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
Niels - the CZ certainly needs more done to it but is obviously cheaper to start with. On my CZ I've had 1.5 inches off the barrel, a barrel band sling swivel fitted, the stock whittled down to a classic English style with ebony forend tip and grip cap etc, a bigger foresight bead fitted. It looks and feels just the bit, but a Ruger requires much less done to it. I don't know which I would recommend, so soon I'll have both!
 
Posts: 159 | Location: New Zealand | Registered: 30 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia

Since January 8 1998 you are visitor #: