The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Modern Military Rifles thoughts on QD rings - extra high ??Go | New | Find | Notify | Tools | Reply | |
| thoughts on QD rings - extra high ?? | Login/Join |
Moderator |
What are your thoughts on 1pc vs 2pc, height/cantilevered, QD vs fixed? opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | ||
|
| one of us |
I have a set on my AR carbine so I can clear the rear pop up peep. They seem to work well | |||
|
One of Us |
I have a couple one piece cantelever types but I run hex nuts no QR I mount my scope over my charging handles to get the corect eye relief for standard length of pull so in reality a cantilever in my case is not necessary LaRue is my choice but the Burris PEPR is hard if not impossible to beat for the $$$ ________________________________________________ Maker of The Frankenstud Sling Keeper Proudly made in the USA Acepting all forms of payment | |||
|
One of Us |
I use Talley, or old Kimber, QD rings on all my personal rifles. Medium usually. On ARs, I use the Armalite all one piece bridge rings. | |||
|
| one of us |
I use them on every rifle I own, most all of my rifles have iron sights so it only makes sense plus I have NECG peeps which I carry in the event I need to switch. I also have multiple scopes for each hunting rifle . I have both Leupold, burris and Warne. I recently had a failure on a Warne, seems it had poor metal smelting and the screw pulled through the ring and not the threaded side either, looked like pot metal. Warne warrantied it stated they have never seen this happen before? When I mount these rings I make sure I have the forward ring pushed forward and the rear ring pushed back so that the recoil lugs engage the bases, I also ony use steel bases. NRA Life Member, ILL Rifle Assoc Life Member, Navy | |||
|
| One of Us |
I use Talley quick detach low mount rings with low powered Leupold scopes on many of my doubles. The ribs are dovetailed and slotted so that the rings drop in from the top and slide forward. I either get the front ring to snug up against the rear sight or I dovetail in a recoil lug for it to fit up against. | |||
|
One of Us |
I use extra high Warne QD rings on an AR. | |||
|
| One of Us |
Seekins on bolt guns and LaRue or ADM on AR platform. I need cantilever on the small frame AR, not as much on the large frame. | |||
|
| One of Us |
2 years ago i got a repeated issue with aqd detach warne and they had never seen that too ... i was for a ruger hawkeye ... | |||
|
One of Us |
For AR style rifles I've gone to Burris PEPR mounts. The seem to return to zero fairly well once you get them adjusted to your rail. I do have one rifle with ARMS extra high QD rings on a riser but the PEPR is just a more elegant solution. | |||
|
| One of Us |
I'm going to put a DNZ freedom reaper on the next couple projects and see if they can hang with the Larue ________________________________________________ Maker of The Frankenstud Sling Keeper Proudly made in the USA Acepting all forms of payment | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Modern Military Rifles thoughts on QD rings - extra high ??
Visit our on-line store for AR Memorabilia