one of us
| No, it's not an English Wesley Richards. It started as an inexpensive gun made by a maker trying to capitalize by using a name similar to a quality maker. Basically a low quality piece of work. The use of near copy cat names was common by Belgium makers in the late 1800's and possibly a bit beyond. Just told a gent to use the one he had (same name as your gun) that it was a wall hanger at most and should have the firing pins removed to protect the unknowing. |
| Posts: 312 | Location: B.C., Canada | Registered: 12 March 2002 | 
IP
|
|
one of us
| ... Also bought stuff from Belgium, as in his ZAR Martini rifles, which were assembled on Francotte large cadet-type actions. And I don't mean Francotte-designed (of course), but Francotte-made, as evidenced by some action markings. The Francotte records, by the way, were destroyed when the original company went bankrupt in the 1970's - lots of sensitive material in there probably, that could have embarrassed some top brit gunmakers. |
| |
one of us
| I bought a shotgun marked W. Richards and contacted the Westley Richards Company and supplied photographs. First off they said they never made a gun marked W. Richards. They also said the proof marks were the biggest clue to identifying it--Belgium made--not by them. They also supplied a reprint of an ad from a hardware store I think in Missouri around 1880 that would stamp whatever name you wanted on a cheap Belgium shotgun. Westley Richards Company said from the number of inquiries they get,W.Richards must have been a popular name to stamp on. This shotgun did have some above average work like a carved horn butt plate,but it is not a Westley Richards that commands high dollar. It had Damascus twist barrells and I think wallhanger would best describe its use. BTW the importer here in the U.S.--dont remember now who was the importer at the time could supply no information was their answer before I went direct to the Westley Richards Company--this was 12-15 years ago. |
| Posts: 1289 | Location: San Angelo,Tx | Registered: 22 August 2003 | 
IP
|
|
one of us
| Forgot to mention,I did ask Westley Richards Company about the guns value. They said they wouldn't think over $50. That might be arrogance on their part like asking Rolex what a Seiko is worth and them saying $5 ? They did send me some brochures of their guns,and they are proud of them. |
| Posts: 1289 | Location: San Angelo,Tx | Registered: 22 August 2003 | 
IP
|
|
one of us
| I just examined a muzzle loading double shotgun marked W.H. Richards. I am not certain of the bore but it might be 14 gauge. In any event this was a well made piece with quality wood, fitting and engraving. Unfortunately I was unable to find any indication on the exposed surfaces as to where it was made. Certainly a different cut of cloth than the W. Richards I had previously referred to. Perhaps this was a gun finished by the English maker, perhaps not. |
| Posts: 312 | Location: B.C., Canada | Registered: 12 March 2002 | 
IP
|
|