THE ACCURATERELOADING.COM GUN CLEANING FORUM

Go
New
Find
Notify
Tools
Reply
  
Latest thoughts on carbon rings
 Login/Join
 
one of us
posted
What are your methods for removing the "dreaded" carbon rings?


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

 
Posts: 7429 | Location: Arizona and off grid in CO | Registered: 28 July 2004Reply With Quote
one of us
posted Hide Post
Carbon cleaner, bronze brush and drill motor. Carefully!
 
Posts: 39194 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
one of us
posted Hide Post
With respect to .22rf, my stuff get cleaned after every session with Kroil, nylon brush back and forth in chamber area, then patches: https://eley.co.uk/barrel-clea...improving-your-shot/

The fellow who runs Anschutz NA is not averse to regular cleaning, had a great writeup (can't find it now) debunking non-cleaning of .22rf.

Not afraid to use a good quality bronze brush, but borescope sez I don't need it. Know what I'm looking for but never get the dreaded carbon rings. Probably b/c of frequency of cleaning.
 
Posts: 670 | Location: Dover-Foxcroft, ME | Registered: 25 May 2002Reply With Quote
one of us
Picture of Clayman
posted Hide Post
I've had pretty good results lately with an orderly combination of Kroil or Hoppe's followed by Flitz on a patch wrapped around a brush. Chuck the setup in a drill at low speed, high torque and move back and forth until satisfied.

It's a pain in the ass. Big Grin
 
Posts: 1140 | Location: Gilbertsville, PA | Registered: 08 December 2005Reply With Quote
one of us
posted Hide Post
Long soaks of Kroil on a bore mop. I leave the wet bore mop in the bore/throat as Kroil creeps as they say. Leave the rifle muzzle down so that things don't migrate back into the action. Generally an hour or two is all that it takes for really stubborn buildup.

Also, many folks are using ZMax motor oil additive. It attacks carbon quite well from reports. But I have not used it.

More barrels and throats are worn out do to excessive scrubbing. Let the chemicals do their thing and scrub less.


___________________

Just Remember, We ALL Told You So.
 
Posts: 22442 | Location: Occupying Little Minds Rent Free | Registered: 04 October 2012Reply With Quote
one of us
posted Hide Post
Ive never had a carbon ring show up??? Have removed them from a friends rifle some years ago..I use Kroil and that paste cleaner?? I still have a jar of that somewhere in the shop, can't recall the
name of it, but it sure works with Kroil..Think I got it from Brownells.

Hipshot hit the nail on the head for me..Its JB bore cleaner...works really good and sometimes I use BLUE GOOP in the mix..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 38259 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
Is it JB Bore Cleaner Ray ?

Hip
 
Posts: 638 | Location: Long Island, New York | Registered: 04 January 2008Reply With Quote
one of us
posted Hide Post
For rimfire chambers, I use a .25 or larger caliber bronze brush and spin it by hand while its screwed onto a cleaning rod. I've used JBs and other solvents on the brush as well. I've even chucked the cleaning rod with brush into an electric drill and gave it a go, marking the cleaning rod with tape so I didn't push the brush into the rifling.

For centerfire, every 300 rounds or so, I'll clean the barrel with Hollands Witches Brew and a brand new caliber appropriate bronze brush. It will remove almost all carbon in your entire barrel. I use a borescope before and after with both rimfire and centerfire to see what is actually happening inside the barrel.
 
Posts: 433 | Location: North Pole, Alaska | Registered: 28 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2021 Accuratereloading.com


Visit our on-line store for AR Memorabilia