The Accurate Reloading Forums
loading with .690 inches ball in 12 gauge
loading with .690 inches ball in 12 gauge
hi
have someone tried to load a single round ball in 12 gauge? if so please share your knowledge with us.
regards
YES
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
24 June 2007, 11:20
Lefteris VassiliadisNot personal experience with them. There are some loads in Shotgun Slug Loading & Field Application. Let me know your e-mail and I can send a copy to you. Also for .715" round balls.
Lefteris.
Hi
my mail adress is adamson_adam@hotmail. com and be gratful to receive your loading data,
regards
yes
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
hi
thanks i received the mail , very interesting.
regards
yes
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
There used to be information about roundball loads for the 12 ga. But it's hard to find now.
I've never loaded round ball because I thought the accuracy would be miserable.
But it would be interesting to see how these actually perform!
Don
PS - Please share your info.
I load .690's for USPSA three gun. Been doing it for about 15 years or so. As cast my .690's come out right at 500 grains. 547 grains is 1& 1/4 ounce. I started loading with PB powder and a low charge, raising it up a half grain at a time until my 1100 would function every time.
Use only Winchester AA 118 wads. Nothing else works for beans. Cast pure lead only. [ or as pure as you can get]. Accuracy requires some choke in your gun. Never got any good results with open chokes. My 1100 with the improved modified choke in it will hit bowling pins at 50 yds consistantly.
Loads only chrony at 1150 or so but put holes in paper and make 1100 cycle with no recoil to speak of.
I repeat Winchester AA wads only. Blows the petals off anything else I've tried. Use the white ounce and one eight was. Nice crimp in a AA hull. Be safe, enjoy.
Pure lead .690" balls come out at about 487 gr. A .690" with any alloy would weigh less than that.
Doesn't the WAA12 wad leave some room for movement for the .690" ball?
No filler wads needed in/over the wad to bring it up to crimp?!!

05 September 2007, 08:44
Idaho Sharpshootersee my post "two hours" and the picture.
Rich
DRSS
19 February 2008, 06:18
Allan DeGrootThere was a load in the lyman shotshell handbook
4th edition? with a pumpkin ball in an RXP wad and star crimped.
I loaded a bunch of them and had some fun lobbing them around the countryside from my rifled barrel....
AD
If I provoke you into thinking then I've done my good deed for the day!
Those who manage to provoke themselves into other activities have only themselves to blame.
*We Band of 45-70er's*
35 year Life Member of the NRA
NRA Life Member since 1984