The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Single Shot Rifles Prefit recoil pads for Ruger #1.Go | New | Find | Notify | Tools | Reply | |
| Prefit recoil pads for Ruger #1. | Login/Join |
| One of Us |
Have any of you used any of the 'pre-fit' recoil pads for a Ruger #1 - like a Sims Limbsaver or Decelerator? I am wondering how well these fit or should I plan on using a grind-to-fit? I do not plan on shortening the LOP - just replace the existing pad. Thanks. NorthGaAire NorthGaAire | ||
|
one of us |
Do they make a pre-fit Decelerator for the #1? I have looked, but never seen one(but sometimes I forget to use my eyes while looking). Jason "You're not hard-core, unless you live hard-core." _______________________ Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt. Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure. -Jason Brown | |||
|
| One of Us |
NorthGaAire I have installed pre-fit Limbsavers on two of my #1's .. They were not 100% and I had to fill and re-drill one of the original holes they are close enough for me..If anything I have enough extra pad to make a perfect fit.. | |||
|
| One of Us |
The prefit Decelerator for my Marlin 1895 wasn't so I used it for a grind-to-fit project on another rifle. Were it my No.1 I'd have a gunsmith install a proper grind-to-fit job. I'd pass on the Limbsaver too; the one I put on my Marlin certainly does its job but it's kinda gooey and collects fibers from the carpet on the floor of the safe. I'll use a Decelerator when I replace it. | |||
|
| One of Us |
Ruger kept changing the stocks on the Ruger No 1's, that's why the Limbsaver's don;t always fit exactly but the one you want is probably 10001. Suggest you download the template from the Limbsaver web site and test it on your stock. | |||
|
| One of Us |
Have any of you used the Kickeez listed as prefit for the Ruger #1?? Thanks. NorthGaAire | |||
|
| one of us |
So, do they? Jason "You're not hard-core, unless you live hard-core." _______________________ Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt. Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure. -Jason Brown | |||
|
| One of Us |
Pachmayr lists the #01703 will fit the Ruger Red label. Kickeez lists the #KZ108 will fit the Ruger Red label, Ruger Number 1, Browning Citori/BAR If you match up your stock dimensions with the pad templates you get pretty close. NorthGaAire | |||
|
| One of Us |
FWIW-- I put the KZ108 on the Ruger #1 in .450/400 and it fit nicely. NorthGaAire | |||
|
One of Us |
I put a Limbsaver on a No. 45/70 that was loaded to 55# of free recoil. (It helped a lot. "Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen." | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Single Shot Rifles Prefit recoil pads for Ruger #1.
Visit our on-line store for AR Memorabilia