THE ACCURATERELOADING.COM SINGLE SHOT RIFLES FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Griffin-Fraser
 Login/Join
 
One of Us
Picture of ACRecurve
posted
My next project is gonna be on a Griffin-Fraser action. I want to use a rimmed cartridge between .26 and .30 caliber. Although I've been allergic to wildcats for the last several years, I'm open to suggestions. Anyone?


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

 
Posts: 6711 | Location: Oklahoma, USA | Registered: 14 March 2001Reply With Quote
One of Us
posted Hide Post
A 7x65R, would be hard to beat. Brass, dies, bullets, and even factory ammo, are available. It's basically a ballistic twin of a .280 Rem(or nearly so), and it has a rim, as a single shot cartridge should!

Jeff
 
Posts: 144 | Registered: 17 December 2007Reply With Quote
One of Us
posted Hide Post
6.5x54r, .300h&H flanged are both nice rounds.
 
Posts: 3770 | Location: Boulder Colorado | Registered: 27 February 2004Reply With Quote
One of Us
Picture of ACRecurve
posted Hide Post
Y'all must be psychic or something. I was toying with the ideas of 7x57R, 7x65R, and Holland's Super Thirty...and even though I set the top end at .308, a 9.3x74 is kind of appealing as well. A 275 H&H would be cool, too, but brass might be a problem.


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

 
Posts: 6711 | Location: Oklahoma, USA | Registered: 14 March 2001Reply With Quote
One of Us
posted Hide Post
A year ago I went through a simular selection process which ending in my choosing the 7x57R. In my rifle, a Blaser K95 with scope and sling weighing 7lbs 3 ozs, the x57R is a delight to shoot. It can be made to shoot half inch groups with a variety of bullets from 140 to 175 grains, which covers most medium game shooting to 200 yards with ease. It can take animals to 300 yards but it's been many years since I shot an animal at that range.
 
Posts: 1374 | Location: New Zealand | Registered: 10 February 2005Reply With Quote
One of Us
Picture of Alberta Canuck
posted Hide Post
quote:
Originally posted by ACRecurve:
Y'all must be psychic or something. I was toying with the ideas of 7x57R, 7x65R, and Holland's Super Thirty...and even though I set the top end at .308, a 9.3x74 is kind of appealing as well. A 275 H&H would be cool, too, but brass might be a problem.



I have a single shot 7x65R, and it is my "go to" elk rifle.

If I wasn't going to hunt elk very often, and would mostly be chasing deer, I'd probably pick the 8x57R. That gives you plenty of bullet choices from 150 grains to 225 grains or so.

If I was only going to hunt deer and similar-size or smaller animals, I'd take the suggestion given to you by one of the posters above, and get a 6.5x53R. It is identical to the 6.5 M/S cartridge except it has a rim. Brass is easy to make from both .303 British and .30-40 Krag. You can even use 6.5 M/S loading dies. I do have one of these on a single shot (and another on a bolt gun) and they are a wonderful little round too. Bullets from 120 grains to 156 grains perform splendidly in mine. The 156 grain bullets actually perform well on elk, moose, even grizzly bears, but I wouldn't want to face such a bear close up in the bush with one. One shot with a 6.5 vs. a big, angry, very close bear is not my idea of dependable life insurance!
 
Posts: 9685 | Location: Cave Creek 85331, USA | Registered: 17 August 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia