The Accurate Reloading Forums
Ruger No.1 Dream Gun?
04 February 2007, 21:51
TankerRuger No.1 Dream Gun?
What caliber and configuration would you like to see the Ruger No.1 offered in?
04 February 2007, 22:41
nordrsetaI'd be well set with No.1 Medium Sporters in 300 H&H, 9.3x74R, and 450/400 with a no thicker than necessary 28 inch barrel, serious fixed sights, case colored receiver, and a glorious walnut stock.
04 February 2007, 23:13
375-06JDJNo 1 H stainless in 458 lott with an incredible piece of walnut would suit me fine....so much that I started carving my piece of walnut for my lott this morning. A return to the factory trigger that Moyers makes now wouldn't hurt either. The varmint model as a stainless in 257 weatherby wouldn't hurt either.
04 February 2007, 23:24
BuglemintodayNo.1 Stainless/Laminate in .577

"Let me start off with two words: Made in America"
05 February 2007, 05:25
tomo577577 ne with knock out circassian walnut
TOMO577
DOUBLE RIFLE SHOOTERS SOCIETY
05 February 2007, 05:40
jimatcati have a .458 win mag #1h... in a couple weeks, i'm looking at a .375 h&h... i'm still waiting on the 9,3 x 74r....
go big or go home ........
DSC-- Life Member
NRA--Life member
DRSS--9.3x74 r Chapuis
05 February 2007, 07:48
Idaho Sharpshooter9,3x74R, 10lbs, 28" medium taper barrel, 3-leaf express sight and barrel band sling swivel. Hooded ramp front with 1/8" ivory bead. 3X circassion walnut, bullet trap in buttstock, grip cap w/spare front sight. Color case-hardeneded winchester grey by Turnbull, and rust blued barrel. All fittings cased. And it's big twin brother in 550 Gibbs w/24" bbl @ 12lbs.
Rich
DRSS
05 February 2007, 10:23
EsldudeOh, maybe a 17 Remington. No need for all this big stuff all the time.

05 February 2007, 10:40
LRH270My 9 pound shilen-barreled 9,3x74R:
______________________
RMEF Life Member
SCI
DRSS
Chapuis 9,3/9,3 + 20/20
Simson 12/12/9,3
Zoli 7x57R/12
Kreighoff .470/.470
We band of 9,3ers!
The Few. The Pissed. The Taxpayers.
05 February 2007, 16:04
Bad Ass WallaceI reckon a nice octagonal barrelled 45/120 Sharps would be nice
Holy toledo; I got one

Hold still varmint; while I plugs yer!
If'n I miss, our band of 45/70 brothers, will fill yer full of lead!
05 February 2007, 20:28
asdfShrink the action to that needed to contain the .30-40 class of cartridges. It's too big an action to make into a properly trim and lightweight gun.
05 February 2007, 20:53
fla3006I made my own, a 458 Lott, may do another in 500NE.
NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
05 February 2007, 21:40
ZERMELSeems like there are a lot of elephant hunter on this forum. I wished Ruger would bring back the 257 Roberts. I love to have one. Anybody got one for sale.
Fred M.
zermel@shaw.ca
05 February 2007, 22:35
Bailey BradshawI have my fathers #1 in .300 wtby mag. He took two elk byond 450 yds. Not much I would change about it.
I would place an equal amount of interest in a #1 with octagonal barrel chambered for 6mm rem.
06 February 2007, 01:31
cv1973i would to see something in 50 cal maybe 500 jeffery
06 February 2007, 01:44
6.5BR6.5x55, 260, 338-06, 350 Rem Mag, 7mm-08, 6mm BR in Varmint model
Many voids I think...
06 February 2007, 03:28
Iron Buckquote:
I made my own, a 458 Lott, may do another in 500NE.
Now THAT is one nice Ruger no 1 !!!

I'd like to have one along those lines....in 470 NE
06 February 2007, 03:48
TankerWhat about a 38-55, 32-40, 25-35, 30-30, or a 303 brit.?
06 February 2007, 04:28
BUCKMTBailey, we're building what we call Lynx rifles on #3 actions in 6mm Rem, with tapered octagon barrels, exhib walnut, etc etc. email me for details if you are really interested.
walt@buckmountainrifleworks.com
06 February 2007, 05:10
Rodney H.{500Jeffery}Don't believe a 500NE would be unreasonable with a very fine piece of wulnut, in the #1H configuration with express sights. I would like to see the rimmed nitroexpresses offered in the #1. R.
06 February 2007, 06:34
Remington40xHow about a walnut/blue 1A configured rimfire. I'd particularly like a .22 long rifle, but wouldn't turn up my nose at either of the .17s or the .22 Magnum.
06 February 2007, 06:51
richjTakedown 300 and 375 H&H. Does anyone do a #1 takedown??
06 February 2007, 17:16
Willie B270 WSM with a 26 inch PacNor super match stainless steel barrel. Shoots anything from the 110 Triple Shock to the 160 Nosler partition.
Willie B
07 February 2007, 06:47
TankerI guess there is not much interest in the older dash rounds or the 303. Seems they would make fun cast bullet shooters in the No.1 At least to me.
08 February 2007, 19:43
El DeguelloBeing slightly bizarre, I'd like a .32/40 and a .38/55.....
"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
09 February 2007, 12:57
JOE MACKI'm thinking about a .411/.348Winchester AI with a 22 or 24 inch octagonal barrel. The safety needs to be inlet to avoid any trouble with case extraction/ejection. Then a nice piece of wood would be nice. I've already got a .405Winchester, .411KDF, .411Hawk and am waiting for the .450/.400 and perhaps a .400H&H. Sorry, I've got a fixation on .41 caliber.
JOE MACK aka The .41FAN
HAVE MORE FUN AND GET THE JOB DONE WITH A .41
I am the punishment of God…
If you had not committed great sins,
God would not have sent a punishment like me upon you. (GENGHIS KHAN)
09 February 2007, 18:21
mr rigby
A Ruger nr 1 in .450 Nitro Express
09 February 2007, 20:43
mr rigbythe stock is darker than it look like, i used the flash on the camera to get the beautiful lines out in the color, i dint know tha tthe color on them was so fine as after i saw the picture myself
09 February 2007, 22:20
Buliwyf.338 Lapua with 30" tube.
10 February 2007, 00:09
Paul BA Ruger #1S with 26" barrel in .35 Whelen. As Ruger has dropped the "S" model, and it never came in the Whelen, I have a #1B that will be the donor.
Paul B.
10 February 2007, 05:09
fredj338I have always wanted a #1S in 300h&h w/ 26" med. bbl. Very classy African PG rifle.
LIFE IS NOT A SPECTATOR'S SPORT!
10 February 2007, 07:10
Rodney H.{500Jeffery}Again I would like to see the #1H with very fine wulnut, 3 leaf express sights, quarter rib, and barrel band for sling. I know they come with some of these features but I think a run of British nitroexpresses in say 450 3 1/4NE, 500/465NE,470 NE, 500 NE, and 577 NE would start a nice collection. Guess a 600 is asking too much! R.
11 February 2007, 04:17
Thomas JonesI,ll take a #1A in .257 roberts.
I would get rid of the barrel band sling swivel and just go with a standard one in the wood.
The band looks good but I would not want to shoot it with a tight sling !
...tj3006
freedom1st
11 February 2007, 07:24
308SakoActually there are three which I crave and would probably be foolish enough to pay retail for!
First love would be a .358 Winchester in the 1A configuration.
Second a 1S in .264 Win Mag with a 26" barrel.
Third, the rimfire in a 7/8's scale version of the 1A.
All would have to be blue and walnut though.
Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
11 February 2007, 09:54
Thomas JonesWell sako you are gonna come close to your wish, as i have herd the .338 federal is comming in A #1A. hell of nice rifle as far as i am concerned...tj3006
freedom1st
11 February 2007, 10:45
Woodjackquote:
Originally posted by LRH270:
My 9 pound shilen-barreled 9,3x74R:
I LIKES HER!.. most people sit their scopes much farther back, which dont looks right to me, but yours sits/looks just great.
Do you have to goose your head much forward?
maybe you can tell me barrel length and muzz. dia also, if its not to much trouble. WJ.
11 February 2007, 12:17
LRH27021.5"; I never miked the diameter but it's medium-heavy. I just mounted the scope where it felt right; it's very fast coming on target for me and pretty much fires of its' own volition.
There's more on it at
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9421043/m/781103565and
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9421043/m/197102785
______________________
RMEF Life Member
SCI
DRSS
Chapuis 9,3/9,3 + 20/20
Simson 12/12/9,3
Zoli 7x57R/12
Kreighoff .470/.470
We band of 9,3ers!
The Few. The Pissed. The Taxpayers.
11 February 2007, 12:38
AK HunterNo doubt about it. It would have to be a No.1S in .300 H&H with a 26" barrel.
Takedown would be a huge plus.
How about a "Supergrade" version with upgraded wood and color case hardened receiver?
11 February 2007, 19:21
Dr. Lou#1S with 26" bbl in stainless/walnut:
300 H&H
264 Win Mag
6.5x55
358 Norma Mag
1A with 22" bbl in stainless/walnut:
223
218 bee
17 HMR
358 Win.
Already have a Lipsey's special 1A in 35 Whelen in stainless/walnut.
Though they already exist, I also want a 1A in 7x57,204 Ruger, the new 9.3x74R and 450/400. Lou
****************
NRA Life Benefactor Member
12 February 2007, 02:48
Woodjackthanks LRH270,
as far as naming her goes, this poster got it rite!
quote:
Originally posted by loud-n-boomer:
Brunhilda!!!
Brunhilda (circa 543 – 613) was a Frankish queen who ruled the eastern kingdoms of Austrasia and Burgundy. She is usually depicted as a large German lady singing Wagnerian opera. She also was reputed to be very adept at ending the lives of those who opposed her.
If she ever has pups, be sure to put my name down for one
