THE ACCURATERELOADING.COM SINGLE SHOT RIFLES FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Rolling or falling block action
 Login/Join
 
One of Us
posted
I would like to build a classic rolling or falling block in 40-90 sharps straight. Who makes a good inexpensive action(not ruger, just a personal bias)?

Phil


"A man can never have too much red wine, too many books, or too much ammunition."

Rudyard Kipling
 
Posts: 28 | Registered: 21 May 2007Reply With Quote
One of Us
posted Hide Post
there is one design limitation with the rolling blocks, the flip back breech block. It can limit the oal on longer cartridges. I had a friend determined to chamber one in 45-120...not nearly enough clearance to get the loaded round into the chamber.

My suggestion: buy a Uberti from Cimarron Arms in 30-40 Krag. There are two versions, get the deluxe, pistol grip, double set triggers, and checkering. You can get a 40 caliber (make sure you specify .408" or .410" bore, based on the dies you get, there are at least two versions) barrel from Badger tapered octagon to match. Leave it at 32" to start, and have some real fun.

Rich
DRSS
Knowledge not shared is knowledge lost...
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
one of us
posted Hide Post
IS, boy if that ain't the truth,,have a barreled action {No-1} that some one did in 45-120, and then grooved the hammer nose so the round would slid in,,

It and another No-1 some one tried to make into a cheap buff gun just set around waiting for me to make up my mind on what to do with them now.


Stay Alert,Stay Alive
Niet geschoten is altijd mis

Hate of America is the defeat position of failed individuals and the failing state
 
Posts: 1529 | Location: Tidewater,Virginia | Registered: 12 August 2002Reply With Quote
One of Us
posted Hide Post
YOU CAN BUY A WICKLIFFE FALLING BLOCK ACTION KIT WHICH WILL EASILY ACCCOMODATE YOUR 45-120 ROUND.

COST OF THE ACTION FULLY MACHINED, HARDENED READY FOR YOU TO POLISH, BLUE THEN ASSEMBLE IS $410.00 PPD

THIS IS AN EXTREMELY STRONG ACTION .

WE ALSO OFFER THE NEW MODEL WITH A TOP TANG FOR $535.00 PPD.

PICS AVAILABLE

TOM

814 774 5739


TOMO577
DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 1144 | Location: west of erie, pa | Registered: 15 September 2006Reply With Quote
one of us
posted Hide Post
You probably already know this but the .40-90 Sharps straight - ain't. A Sharps that is. They never made 3.25" cases in any caliber. Be that as it may, the rolling block will require nose modification to the hammer as pointed out. A good falling block action like a Winchester would be ideal for a cartridge like this. There are many modern makers of Winchester actions and completely rifles. You could buy a Uberti in .45-70 and ream it to 120, or any of a dozen other paths to that point. It's not to hard to turn up a 74 Sharps from Shiloh in that caliber and some Pedersolis as well. Both are excellent rifles.

Brent


When there is lead in the air, there is hope in my heart -- MWH ~1996
 
Posts: 2257 | Location: Where I've bought resident tags:MN, WI, IL, MI, KS, GA, AZ, IA | Registered: 30 January 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia