The Accurate Reloading Forums
Help me figure out what type of scope base I need

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/98610964

11 February 2003, 12:16
<harkm>
Help me figure out what type of scope base I need
I figured you guys here have seen your share of scope bases or mounts. The rifle is a Kleinguenther k-14. I would like to replace the base (scraped up) that was originally on the rifle but I can't seem to find a replacement anywhere. The base has two screws side-by-side behind the front ring hole. All the bases I can find have one screw in front and one screw in back of the front ring hole. I was going to get the advise of a gunsmith but I figured you guys here are gunsmiths! Thanks
11 February 2003, 16:33
<harkm>
Anybody? Anybody seen a base with 2 screws, side by side behind the front ring hole? Any help is appreciated.
11 February 2003, 17:57
southern utah
Brownells has a blank base you could have drilled to match
12 February 2003, 02:57
<harkm>
Thanks SU for that response. I will go that route.