Go | New | Find | Notify | Tools | Reply |
One of Us |
Hey Guys, Do any of you recognize this receiver? I'm assuming it's some sort of small ring, and was hoping that an old Browning barrel I have laying around (243Win) would be suitable for spinning on. Thanks!!! | ||
|
One of Us |
Going by the pics. it looks like the front ring is thicker on the top & bottom, I suspect it's a large ring turned into a small ring with large threads 98 Mauser. I would like to see pics. of the bottom metal & bolt - how many locking lugs 2 / 3. A .243 is fairly high pressure and as such taking into account the action may be modified as I suggest - I would not, but others more knowledgeable may chime in. JMHO - FWIW. --- John303. | |||
|
one of us |
I know my opinion doesn't count for much but I think John303 hit it right on the head. Charger hump and front receiver ring ground. Steve E......... NRA Patron Life Member GOA Life Member North American Hunting Club Life Member USAF Veteran | |||
|
One of Us |
small ring front lug shape? NRA Life Member Gun Control - A theory espoused by some monumentally stupid people; who claim to believe, against all logic and common sense, that a violent predator who ignores the laws prohibiting them from robbing, raping, kidnapping, torturing and killing their fellow human beings will obey a law telling them that they cannot own a gun. | |||
|
One of Us |
Looks like either a scrubbed small ring, large thread Mauser or a large ring ground to small ring contour. Probably the former. Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | |||
|
One of Us |
I have a small ring with large thread Polish (Same as Kar 98) and the recoil lug is the same. Both the Kar and the Polish version have integral hand guard flanges on the top of the front ring. All the custom guns that I have seen have this flange ground off. The above action seems to have had a lot of metal removed. From what I have learned here on AR, these actions are not very strong to start with, let alone with extra metal ground off. Having said that, I must admit that I once saw a very nice custom 270Win built with an Erfurt 1917 Kar action. It was put together by Gene Simillion. It had been surface ground and re-heat treated etc. I think I would feel better using the above barrelled action as a garden stake. I'm thinking the same about my small ring Polish 98 as well. I was advised to only use these actions for very low pressure and low bolt thrust cartridges, as there were even some problems with the original 8x57 chambering. Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | |||
|
One of Us |
When I measure across from 3 to 9 O'Clock, it reads about 1.278. From 12 to 6, it measures about 1.305. I think that front edge is just damaged slightly. I think the angle of the photo makes it look a bit off, but in person, it looks pretty uniform all the way around. Does anyone know how to decipher the marks on the bottom side? | |||
|
One of Us |
Tend to CM ´s opinion. The polish like the German carbine version had a metal sheet , which was part of the front ring, to hold the upper stock part in place. If you civilize the action you must file that part down. Improperly done you have the picture we can see here. | |||
|
One of Us |
Stokes, So - Those early Browning FN Highpower M98s in .243 & .308 (before they went to the Sako actions for those cartridges) really are small ring actions? I thought that they might be large ring shank that were ground to small ring contour, externally. I have never found anybody who had pulled a barrel to know for sure. Except you, it sounds like. I have one in .308. Interesting, and good to know. | |||
|
One of Us |
You know.... I was just assuming that, but I haven't actually checked it. So, don't quote it as gospel yet. Tomorrow I'll dig it out and measure it. | |||
|
One of Us |
Browning did make a standard action lenght SR, small thread in the FN Supreme 400. A few around but not many. --- John303 | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia