One of Us
| Ebay has them pretty frequently, check there. If you can‘t find one anywhere you can either send the action to Remington and have one installed, or buy one of the after market jobs from Midway...but those need the bolt handle, ejector and extractor’s installed.
The good thing with having Remington do it for you is they will headspace it to your barrel and warrantee the work. |
| | | Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005 | 
IP
|
|
One of Us
| MidwayUSA sells them although they are an aftermarket setup to take the SAKO style extractor and have no handle on them. http://www.midwayusa.com/esearch.exe/search?TabID=0&cat...+to+Begin+Search.y=9
"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
|
| | | Posts: 1699 | Location: San Antonio, TX | Registered: 14 April 2004 |
IP
|
|
One of Us
| Looks like you can get them with either the SAKO style extractor cut or regular Remington extractor.
"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
|
| | | Posts: 1699 | Location: San Antonio, TX | Registered: 14 April 2004 |
IP
|
|
One of Us
| I didn't know midway had them. I just ordered from them this morning. I need one for an action I trued, so I need to true the bolt and open it and install a sako extracor for a Lazzeroni caliber |
| | | Posts: 118 | Location: Price Utah | Registered: 03 January 2006 |
IP
|
|
One of Us
| Midway carries an ECT Remington 700 bolt body for long or standard actions either cut for a Sako or a Remington extractor. $157.99 part number for a magnum face/Sako extractor cut is 118-214. Remember, this is just the bolt body, no handle, ejector or extractor. |
| | | Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005 |
IP
|
|
One of Us
| I have some Remington bolts. Email me
jmcmunn@imbris.net
Jay |
| | |
One of Us
| Jay I tried to e-mail you but it bounced back. I've been having trouble with my ISP. Send me an e-mail and I'll try and reply to it. Thanks |
| | | Posts: 118 | Location: Price Utah | Registered: 03 January 2006 |
IP
|
|
One of Us
| I guess you'll need an address! kenk@emerytelcom.net |
| | | Posts: 118 | Location: Price Utah | Registered: 03 January 2006 |
IP
|
|
One of Us
| Replacement bolts are available from Dave Kiff at PTG. You can specify bolt diameter, Sako or Rem. extractor and bolt face. They throw in a bolt handle that you will have to install. Also need ejector parts and firing pin assembly. |
| | | Posts: 90 | Location: NW PA | Registered: 20 January 2005 |
IP
|
|
One of Us
| quote: Originally posted by kwk:
I guess you'll need an address! kenk@emerytelcom.net
Email sent, Jay |
| | |
