The Accurate Reloading Forums
Pre 64 Model 70 prices???

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/956102977

16 December 2007, 02:38
Customstox
Pre 64 Model 70 prices???
I saw a comment recently about pre 64 prices and was wondering what they are selling for. I have not been paying any attention to the prices on them of late. I have a 1939 pre war barreled action in .270 with a post war safety on it (I also have the original one) and was thinking of selling it and didn't want to screw anyone, particularly me. Smiler The gun has two opposing sight base holes in the barrel just forward of the action and in the rear bridge. The rear holes would be covered by most sight bases but those in the barrel of course would not. The barrel bore looks like it has seen better days (may just need cleaning) but I have not shot it to give you any idea of it's accuracy.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
16 December 2007, 03:01
butchlambert
Chic,
I sold a 1948 model in 30-06 with a side scope mount on it for $650 a few months ago. It was in good shape with a little pitting at the muzzle of the barrel.
Butch
16 December 2007, 21:14
Jim Kobe
The prices have gone sky high for those in original condition without any extra holes. The problem is not desire so much as it is for availability. You just don't see them anymore. I have bought the standards for the action alone a year ago for $575 or so but now I wouldn't sell the plain action alone for less than %800. You just cannot find them laying around like you used to; at least not here.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

17 December 2007, 03:40
mildotfever
Chic, the action will bring at least 7-750 and you could always shop around for another barrel. I have a FW 308 that I am going to part out and I want 800. for just the barrel action with the trigger and I would expect it to go pretty fast. Good luck with it and I will nose around for a used barrel, jd
17 December 2007, 07:04
577NitroExpress
I got mine from Mr. Kobe about two years ago for a very fair price.


577NitroExpress
Double Rifle Shooters Society
Francotte .470 Nitro Express




If stupidity hurt, a lot of people would be walking around screaming...

17 December 2007, 17:37
mildotfever
577, I also bought a FW 264 mag from Jim Kobe at a great price and a wonderful gun.
Thing is 2 years ago the prices were fair, today they are insane.
I have sold unaltered mint stocks in the 4-500 range, thankfully I had a butt load of stocks sitting around and I guess a butt load of pre-64's.
17 December 2007, 18:31
Marc_Stokeld
Earlier this year I sold the stock off of an M70 for more than I paid for the entire scoped rifle. When the dust settled, I have the pre-64 Magnum action, Leupold scope, and more money in my wallet than the morning before I bought the rifle.

Some people hate to see guns cut up, and I do too at times-depends on condition, rarity, etc. But every time a gun is parted out, that means someone is getting a part they need to complete a gun they have.

I have noticed an interesting and consitent trend:

1. When people see someone else parting out a rifle they think is cool and would like to own if they had more money, they make actual moral and value statements about the seller's distinct lack of character. They say he is actually a morally inferior man to them, even though they don't have the money, or don't want to spend it, so they get up on their high horse.

2. BUT... when that smae person needs a part to complete a gun THEY own, they plaster WTB ads everywhere and then complain when someone will not sell them one part, instead preferring to keep their gun whole.

The epitome of a double standard. Just an interesting and boringly consistent observation on gun owners behavior
17 December 2007, 19:28
Jim Kobe
Just check on the prices they are starting at on Gunbroker or Gunsamerica. Insane? Yes.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

17 December 2007, 22:53
MHC_TX
I just picked up a pre-64 Winchester M-70 Supergrade in 300 H&H that is in mint condition. It wasn't cheap, but I know I can get my money back as you just don't find them in this condition everyday.
17 December 2007, 23:18
dempsey
I'm betting the beaters/donors will come back down to reality in the near future. Strike while the irons hot if you're selling.


______________________
Always remember you're
unique, just like everyone else.

17 December 2007, 23:36
vigillinus
Dempsey, IMO the rise in prices is inexorable and if anything it is going to accelerate.
17 December 2007, 23:44
MJines
I started a thread a month or so ago under Gunsmithing asking if folks felt the quality of the Remington Model 30 was superior to the pre-64 Winchester M70. My recollection is that most folks actually preferred the Model 30. They can still be picked up for a reasonable amount compared to the M70s. Go figure. Sometimes the legend does seem bigger than the man.

https://forums.accuratereloading.com/eve/forums/a/tpc/f/...=907109957#907109957


Mike
18 December 2007, 06:53
GSP7
OK , I need some investers.

I know at least 8 pre 64s that are at a auction. Some are clover leaf tang, 2 are 375 H&H, 1 300 H&H, 2 30-06, saw a 270 also etc.

One auction is tonight 17th Dec. and another tommarrow . Then there is a auction in January.

Saw a couple Original Jeffery rifles and many 1873 colts, SXSs, unfinished dakota rifles, enfields, etc and tons of other guns I didnt have time to even look at.

PM me if interested

Rick
18 December 2007, 07:43
GeoffM24
I guess everything is relative. Pre 64 actions are dirt cheap vs. Dakota actions or any of the other custom actions out there but still make a great base for a custom rifle.

Also if you are spending 3-4-5-6 thousand on a custom then an extra 2-3 hundred bucks for the action is the least of your worries.

Comparing them to a lot of the new factory rifles they seem pretty cheap to me.
18 December 2007, 16:29
tnekkcc
I got one, and paid ~$500 becuase I read about them on this forum, but they are not as good as a Mauser, but allot better than a rem700.

The guy that had it before me shot two grizzlies, two mountain goat... two of everything in Alaska, except 120 Sitka deer. He died, and his nephew sold it to me. I took the wood stock off, the counterbored replacement 30-06 barrel off, and the redfield scope off. It is now a 270 Pac Nor barrel, Bordon Rimrock stock, and Leupold scope.

Like a 100 year old axe, it has been through 4 handles and 2 heads.
19 December 2007, 07:03
Frank Beller
I started buying them on the auction sites about 4 years ago, and by today's standards, I almost stole them ($575. - $850.). I now have 19 in various calibers ranging from .22 Hornet to .375 H&H. I have been considering selling a few of them, and buying a nice English grouse SXS shotgun, or a R. Johannsen .416 Rigby. Probably now would be a good time to do this.


____________________________

.470 & 9.3X74R Chapuis'
Tikka O/U 9.3X74R
Searcy Classics 450/.400 3" & .577
C&H .375 2 1/2"
Krieghoff .500 NE
Member Dallas Safari Club
19 December 2007, 18:58
Recoil Rob
Last year a guy around here needed some cash and decided to sell his deceased father-in-laws M-70, 30.06 Standard grade, 1950's gun that looked as though it had one box of rounds through it. He wanted $300.

Unfortunately someone else got to rob him blind before I could.
25 December 2007, 19:42
rugeruser
Given that we're talking about values, I have a 1957 Supergrade in 243 in very good condition that shoots 5 shot half inch groups at 100 with factroy ammo.

It's missing the front post and rear sights, and the receiver has been drilled for scope mounts, but apart from that the whole thing is original including the recoil pad.

It's a really nice rifle, and slick as glass...

Any ideas as to its value?


********************************
A gun is a tool. A moron is a moron. A moron with a hammer who busts something is still just a moron, it's not a hammer problem. Daniel77
25 December 2007, 21:38
tnekkcc
There are two drastically different price systems.

On gunshow tables I see post WWII M70s in 30-06 un alerted for $650 all the time. They go unsold.
I buy allot of guns at gunshows, and I can usually dicker down 10%. So figure $600 sell price.

I never see them that cheap on the internet.

What does it all mean?
If you want to buy one, go to a gunshow and pay $600.
If you want to sell one, go to the internet, like Gunsamerica and ask for $1000.
26 December 2007, 08:50
alvinmack
quote:
Originally posted by Customstox:
I saw a comment recently about pre 64 prices and was wondering what they are selling for. I have not been paying any attention to the prices on them of late. I have a 1939 pre war barreled action in .270 with a post war safety on it (I also have the original one) and was thinking of selling it and didn't want to screw anyone, particularly me. Smiler The gun has two opposing sight base holes in the barrel just forward of the action and in the rear bridge. The rear holes would be covered by most sight bases but those in the barrel of course would not. The barrel bore looks like it has seen better days (may just need cleaning) but I have not shot it to give you any idea of it's accuracy.


Chic,

When did you acquire that toy? I never saw that one when I was out in Wenatchee a couple years back. What are you plans with it?

-Mike