The Accurate Reloading Forums
Back up peep for CZ550's

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/951103097

05 January 2008, 00:46
ACRecurve
Back up peep for CZ550's
Has anyone started making a back up aperture or ghost ring sight that will slide onto the receivers of the CZ550's yet? I've read of a couple of custom makers who have made one or two, but nobody who wants to jump in and make 'em for the rest of us. Anyone know?


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

05 January 2008, 00:53
dsiteman
Might want to check out New England Custom Guns and see what they offer?? Know they make one for the Rugers and thought they made one for Mausers as well???? Good Luck.
05 January 2008, 00:56
Will
Not that I know of. It is just not going to happen at XS Sights.


-------------------------------
Will / Once you've been amongst them, there is no such thing as too much gun.
---------------------------------------
and, God Bless John Wayne. NRA Benefactor, GOA, NAGR
_________________________

"Elephant and Elephant Guns" $99 shipped.
“Hunting Africa's Dangerous Game" $20 shipped.

red.dirt.elephant@gmail.com
_________________________

If anything be of note, let it be he was once an elephant hunter, hoping to wind up where elephant hunters go.

05 January 2008, 01:00
ACRecurve
I've been sitting here staring at a Marbles tang site that's gonna go on my 1885...I wonder if it could be shortened and otherwise modified to work...hmmmm. It's a good thing I don't own a mill! Big Grin


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

05 January 2008, 01:36
Oregon45
I have an XS low weaver sight on my Model 70 and it works very well. With some imagination it could likely be modified to fit the dovetail on a CZ 550
05 January 2008, 02:16
MJines
NECG does now make one that mounts into the rear scope slot on the receiver. Same basic design as the one NECG makes for Rugers. Not sure that it is on their website yet, but call them, they make one, I have one.


Mike
05 January 2008, 05:04
zimbabwe
Would not be much trouble at all to make one up from a CZ factory rear ring. Just cut off the ring portion install some sort of apeture. Just would depend on whether and how much windage/elevation you would need. Elevation could be fixed as you could use an ERA ramp which has elevation in it. Windage could be as simple as a slot and opposing screws. Should be a simple job.


SCI Life Member
NRA Patron Life Member
DRSS
17 January 2008, 22:12
ACRecurve
Yeah, but at $85 USD plus shipping, I choose to give the NECG one a try first...just as soon as it arrives! Big Grin


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

18 January 2008, 01:14
Will
I bought one from NECG at Dallas. Seems like an over-engineered, over complicated hunk of metal compared to the XS ghost ring sight, but then XS doesn't make one for the CZ dovetail.


-------------------------------
Will / Once you've been amongst them, there is no such thing as too much gun.
---------------------------------------
and, God Bless John Wayne. NRA Benefactor, GOA, NAGR
_________________________

"Elephant and Elephant Guns" $99 shipped.
“Hunting Africa's Dangerous Game" $20 shipped.

red.dirt.elephant@gmail.com
_________________________

If anything be of note, let it be he was once an elephant hunter, hoping to wind up where elephant hunters go.

28 January 2008, 00:20
Idaho Sharpshooter
Rusty Marlin here, makes a stylized copy of the Rigby cocking piece peep sight. Check with him he might be able to machine your shroud and bolt a wee bit to fit one on.

Rich
DRSS
Knowledge not shared is knowledge lost...