THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Some FN parts available if interested
 Login/Join
 
one of us
posted
Can one of you guys look at a military shroud and the fn shroud. The military safety has a round cut out that slips over a the ring at the rear of the shroud to hold the safety on. What secures the FN safety to the shroud. I've tried it on a military shroud and it obviously needs the slot. What I cant see is what keeps it in the shroud? bob
 
Posts: 1287 | Location: Houston, TX | Registered: 20 October 2000Reply With Quote
one of us
Picture of TC1
posted Hide Post
when the safty is engaged the cocking piece holds the safety and keeps it fron coming out. when the safety is dis-engaged the small cut you see on left hand side holds it. The military and the FN are the same except for the cut.

Terry
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
posted Hide Post
AAh, so the safety lever is loose until the cocking piece is engaged when you re-assemble? When the cocking piece is turned to secure it to the firing pin, it then holds the safety in place. I think I'm starting to understand. Thanks, Bob
 
Posts: 1287 | Location: Houston, TX | Registered: 20 October 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia