THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Savage 99A lever removal problem
 Login/Join
 
one of us
posted
Trying to repair a faulty hammer indicator on a Savage 99A. Have removed the bolt stop and cartridge stop,lever cap screw and pivot. I removed the lever from its pivot and have been trying to wrangle the lever from the action once I have cleared the lever lug from the bolt but cannot find enough clearance to remove it entirerly from the action. Is there anything I missed. Have been refering from the illustrated takedown procedure in the "Gun Digest sporting rifle take down & assembly guide"
 
Posts: 147 | Location: SW Wash | Registered: 01 January 2004Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
Remove the bolt stop. Remove bolt. Remove trigger pin and trigger. Remove lever pin and screw, remove lever. I don't have a 99A here but you might need to pull the trigger spring as well.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
one of us
posted Hide Post
That works on my old model 1899 TD but not on this newer gun.
 
Posts: 147 | Location: SW Wash | Registered: 01 January 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia