Go | New | Find | Notify | Tools | Reply |
One of Us |
Thinking of getting one for a Rem 700 300 Win Mag. What are your experiences with these stocks? Thanks NRA Patron member | ||
|
One of Us |
Not bad for the price, probably will require a bit of inletting work. Not light, laminates, by nature can be somewhat heavy. | |||
|
One of Us |
Dale, Don't waste your money, they need more accraglas to fill the action area than you can afford. Jim Kobe 10841 Oxborough Ave So Bloomington MN 55437 952.884.6031 Professional member American Custom Gunmakers Guild | |||
|
One of Us |
I've found them to be pretty good stocks for the money also. Haven't had Jim's experience yet. "Peace is that brief glorious moment in history when everybody stands around reloading". | |||
|
One of Us |
I have 2 of them. A boyds blaster on my 10/22 and a classic on my Ruger Hawkeye. The Blaster was a drop in and the classic did require a small bit of fitting. I am very happy with both of them. "though the will of the majority is in all cases to prevail, that will to be rightful must be reasonable; that the minority possess their equal rights, which equal law must protect, and to violate would be oppression." ---Thomas Jefferson | |||
|
one of us |
For once Jim and I are in total agreement. They are called drop in for a reason. Of course you get what you pay for. Aut vincere aut mori | |||
|
One of Us |
Terrible inletting and design | |||
|
One of Us |
You will never see one on my rifles. | |||
|
one of us |
Get a semi-inlet from Shane Thompson and do the finishing yourself, you'll learn a ton and end up with a far superior result. | |||
|
One of Us |
Jim, check ur PMs. NRA Patron member | |||
|
one of us |
Considering getting one for my Sako AV. Rifle would be bedded anyway, so where's the problem ? Have had good reports from other sources. Grizz Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal. John E Pfeiffer, The Emergence of Man Those who can't skin, can hold a leg. Abraham Lincoln Only one war at a time. Abe Again. | |||
|
new member |
We have done several for customers. They do require some inletting for proper fit. But with good pillar bedding, barrel, etc. they do make up into very good hunting rifles (3 shots in less than 1/2"). Customers pick them for price and it is not hard at all to bed them to be good shooters. Bobby | |||
|
one of us |
They're certainly not to be purchased for their looks or by those who expect nice wood to metal fit. For those that like good acraglas to metal fit, have at it. Bobby, you are right, their main selling point is price. Aut vincere aut mori | |||
|
One of Us |
I don't mind them, they are nice enough for the price. Are they the same as a custom gunsmiths $3500 stock? Of course not. Are they better than a factory wood stock, I would say they are about the same, and will be tougher. Day and night better than an injection molded stock especially when bedded. As tough as fiberglass when bedded, but the finish will wear and they "might" warp. You can split hairs and say that a fiberglass stock is tougher, but neither one will survive a horse rolling on it. | |||
|
one of us |
Better than a 2x4, I'll give you that. But not by much. Honestly, with but a few exceptions, I can't think of any Factory stocks that I would voluntarily replace with a Boyds. Aut vincere aut mori | |||
|
One of Us |
Thanks guys Ordered a McMillan NRA Patron member | |||
|
one of us |
I think you will be much happier. Aut vincere aut mori | |||
|
One of Us |
Worst part about a McMillan is the 3-14 month wait. Beyond that they are priceless. | |||
|
One of Us |
I've worked with two of them and I don't see how they are any worse than than the laminated factory pieces I've seen. I think it's the same material, and you get a lot more options with the boyds. Easy to sand/shape/glue and screw then apply whatever finish you want. Did oil on one and paint on another. For me they were a fine option. Depending what you want to do, it was better than paying at least 2x the price for something I'd just have to modify anyway. You can cut and glue fiberglass too I suppose, it's just more work. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia