THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
The "best" bottom metal for a Remington 700?
 Login/Join
 
one of us
posted
From a function and styling standpoint. Who out there is building the best floorplate/trigger bow for a Remington 700? Thanks.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
One of Us
posted Hide Post
Hi,

PT&G (Pacific Tool and Gauge) in White City, Oregon makes some pretty good stuff, and very reasonably priced.

Luck,

Stephen
 
Posts: 538 | Location: Pacific Northwet | Registered: 14 August 2010Reply With Quote
one of us
posted Hide Post
Thanks. I'm looking for something a little different though.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Chuck Nelson:
Thanks. I'm looking for something a little different though.


You need to define "different". All of the third party R700 floorplates I'm familiar with look pretty much the same. Do you want a lever, engraving, gold plating, certain profile?
 
Posts: 714 | Location: Milwaukee, Wisconsin | Registered: 09 October 2003Reply With Quote
One of Us
posted Hide Post
Sunny hill makes one. I haven't seen one in person but their other model guards are real nice.
Don
 
Posts: 1085 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
+1 on Sunny Hill.
 
Posts: 80 | Location: Ohio | Registered: 11 September 2008Reply With Quote
One of Us
posted Hide Post
Not sure how the Sunny Hill is "different"?
 
Posts: 1577 | Location: Either far north Idaho or Hill Country Texas depending upon the weather | Registered: 26 March 2005Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Well, its about a hundred dollars different if that counts. Unless you want to consider detachable magazine bottoms, the differences are going to be pretty subtle matters of personal preference. As far as tacti-cool stuff, the PTG "Stealth" bottom assembly is about the most esoteric of the bunch.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
posted Hide Post
tiggertate is right. $390 for Sunny Hill at Brownells, $125 for the Oberndorf steel at PT&G. The Sunny Hill I have on a modified R700 took a lot of polishing but looks and functions first rate. I have no experience with the PT&G product. Not sure it was available 5 years ago when I bought my SH. As to styling, I'd like a Blackburn for the bow's shape, but they don't make them for the Remington, yet.
 
Posts: 80 | Location: Ohio | Registered: 11 September 2008Reply With Quote
one of us
posted Hide Post
Thanks. I am looking for quality in fit function and appearance. My price point is $500.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Is there something wrong with the factory one?


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10138 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
The Williams stuff I have seen is top notch as well though I have not personally seen their Remington one.

http://www.brownells.com/.aspx...TOM-STEEL-FLOORPLATE
 
Posts: 1577 | Location: Either far north Idaho or Hill Country Texas depending upon the weather | Registered: 26 March 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
IS there something wrong with the factory one?


made my day. thanks!
 
Posts: 1546 | Location: south of austin texas | Registered: 25 November 2011Reply With Quote
One of Us
posted Hide Post
actually, i was talking about points #1-13.
 
Posts: 1546 | Location: south of austin texas | Registered: 25 November 2011Reply With Quote
One of Us
Picture of Jcchartboy
posted Hide Post
I recently installed the PTG Oberndorf bottom metal on a McMillan stocked Rem 700 Jarrett rifle. I couldn't be happier with it.

I also have a Dakota here. It is very nice as well. If it is something that interests you let me know, as I could probably be induced to sell it.

JC

PTG...



Dakota...
 
Posts: 558 | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
Thanks for the pics, a picture is worth a thousand words. The difference as I see it is the seamless lines of the dakota compared to the ptg. I don't like the looks of the gaps around the latch and floorplate tongue. The ptg looks to me like a factory piece where the dakota looks custom. But as to which one to use would be the rest of the rifle. In a synthetic stocked rifle I like the ptg as it matches, in a rifle with a $1000+ wood stock, not so much.
Don
 
Posts: 1085 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
Picture of Jcchartboy
posted Hide Post
Don,

You are spot on. The only thing that I feel should be added as it is very important...the PTG dropped into the factory contoured McMillan stock like a glove with zero inletting, the Dakota would not.

That made the choice of which to use on that gun a no brainer for me.

JC
 
Posts: 558 | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
Makes sense, how in the world can you make a drop in product without gaps? With tolerance stacking I can't see how it can de done.
Unless both parts are held to unreasonable standards.
Don
 
Posts: 1085 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
Comparing the Dakota to the PT&G bottom metal as shown is rather inaccurate. The Dakota is "in the white" and the installed PT&G is finished. Rounded corners and rounded releases in the trigger bow are easily made in the finish. Rounding them is easy, keeping things sharp costs. I speak from experience using PT&G Orberndorf bottom metal for the Remington 700. I finished filing, contouring and emery finishing PT&G bottom metal to my satisfaction and inlet the bottom metal a couple of years ago with no angst. Of course, if one expects a drop in press-fit then issues may arise if simply assembling pieces. I guess it depends upon expectations and expertise. I enjoy inletting metal to a wood stock, and find it theraputic and satisfying. Not all aspire to that level of punishment. To iterate, I found the PT&G bottom metal as seamless as the
Dakota and as well made for much less money. Granted, there will be some profile work to do on the PT&G, but that is part of the enjoyment.

Chuck, the Sunny Hill, Wiebe and NECG (Recknagel) bottoom metal will all require some final finishing in the white. I will buy Duane Wiebe's bottom metal only because he is local, I can visit a bit while purchasing and he offers a great product.

Luck,

Stephen
 
Posts: 538 | Location: Pacific Northwet | Registered: 14 August 2010Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Chuck Nelson:
From a function and styling standpoint. Who out there is building the best floorplate/trigger bow for a Remington 700? Thanks.



http://www.brownells.com/.aspx...-DETACHABLE-MAGAZINE


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia