THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Removal of Blaser R93 side plates??
 Login/Join
 
Tomjac
one of us
Picture of Tomjac
posted
Anyone removed the side plates of a Blaser R93 action? Are they glued?

Here are a pair of replacement side plates.


www.SluttStykket.com
Africa 2004
 
Posts: 191 | Location: Kolbjørnsvik, Norway | Registered: 21 February 2003Reply With Quote
Andre Mertens
one of us
Picture of Andre Mertens
posted Hide Post
They're glued all right.


André
DRSS
---------

3 shots do not make a group, they show a point of aim or impact.
5 shots are a group.
 
Posts: 2420 | Location: Belgium | Registered: 25 August 2001Reply With Quote
Tomjac
one of us
Picture of Tomjac
posted Hide Post
quote:
Dear Mr Jacobsen,

Thank you for your email.
The sideplates are glued and will need to be destroyed to be removed.
You will need to penetrate through the sideplate with eg. An old screwdriver, to get
underneath the sideplate and prise it out. Clean up the surface and glue on your
side plate. We use a Loctite glue 3298 with an Activator.

Should you have any further questions, please let me know.

Best regards

Darren Hull

International Service


www.SluttStykket.com
Africa 2004
 
Posts: 191 | Location: Kolbjørnsvik, Norway | Registered: 21 February 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia