THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Custom recoil pads
 Login/Join
 
one of us
posted
How thick are the Silvers pads you have, my understandng they come in 1 1/2 and 1". I had planned on using a sims pad and my stock is already cut for a 1 3/8 pad (thats what the sims is). But then I realized the butt came out jolly green giant size, steep toe line, long LOP. Thought I could use a slivers and maybe leather cover it, which I havent done. But not to prone to throw things in my old age, should be able to cover one without to much damage to my shop
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
Billy:

The London Guns' pad I have measures 2'x 5 3/4". The Silvers' is 6 1/8".

I like the London Guns' pad better than the Decellerator pad. It has about the same amount of squish, but feels denser. Plus there isn't any hollow that the Decellerator has.

Let me know if you need a Silver's. I have a couple extras.

Good luck.
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
one of us
posted Hide Post
Does anybody make custom recoil pads, I have a stock I'm working on that the butt is slightly larger than whats available or that I know of. I can take it down, but was just wondering if oversized pads were available 6 1/4 or so inches.

I may just use a silvers pad and leather cover it, but they are hard as a rock.

Jeffe already laughted at me
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia