THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Extractor for Winchester M100
 Login/Join
 
One of Us
posted
I have a friend that has a Model 100 Winchester in 243 Win caliber. The last time he took it out it stopped ejecting the fired brass. We discovered that the ejector is missing from the bolt. Does anyone know of a source for an ejector, ejector spring and other parts that may be needed to repair this rifle? The serial # is A256xxx.

Thanks for any help you can give.

DH
 
Posts: 277 | Location: Newton, MS | Registered: 08 August 2005Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
Gun Parts Corp

$21.++ serial number dependent, click the link...






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
one of us
posted Hide Post
Sounds like he needs three components, if the extractor is gone completely.
These are the extractor, extractor plunger, and extractor spring.
Exploded diagram and parts list are at http://www.wisnersinc.com/exploded_views/Winc-100.htm

This crowd supply these parts as a kit: http://www.nulineguns.com/cate..._part_64_2_21_64.php

They say that they bought the Winchester factory parts stock for the M100 and M88.


Cheers,
Doug
 
Posts: 337 | Location: Gippsland, Victoria, Australia | Registered: 02 May 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia