Dumb question, but someone please tell me how to remove the bolt assy from a Rem 600 action...

It's not a dumb question...

Open the bolt and pull it back, then push the bolt release lever forward using a small allen wrench. There is a small slot on the left side of the bolt shroud in the wood.

StikR
We will call the bolt knob the right side of the bolt. You must insert a thin blade screwdriver between the bolt and the left side of the reciever and press foward a small lever that stops the bolt from coming out by hitting the back of the left locking lug. You must hold the lever down against spring pressure and pull the bolt out. To re-insert the bolt you just push the bolt in place as it will push the lever foward as it is inserted into the reciever. I hope I have explained it clearly enough. Just do not force anything.

[ 04-12-2003, 01:58: Message edited by: N E 450 No2 ]

Thanks NE 450,

I don't know what I was thinking when I replied...between the bolt and the receiver is correct.