THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Scope bases done
 Login/Join
 
One of Us
posted
Just finished these for a client. They are for Talley rings and fit a pre-'64 Model 70. You may also see how I sculpted the rear tang.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
I resized these twice and they are still too big. What size do I want?


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
Pretty fancy stuff, Jim.


NRA Patron member
 
Posts: 2652 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
one of us
Picture of Charles_Helm
posted Hide Post
The size is fine for me.

Do they sit lower than the Talley bases?
 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
One of Us
posted Hide Post
The front base, where the ring sits, is about .140" above the front receiver ring.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
one of us
Picture of Charles_Helm
posted Hide Post
 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia