The Accurate Reloading Forums
Source for Horn

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/8861089211

12 July 2009, 05:20
rgg_7
Source for Horn
I'm looking for a source for a couple pieces of horn for classic stock restoration. Must be solid and very black. Anybody got a couple pieces that are big enough for a tip that I can buy. Source would be appreciated...I've done all the usual internet searches and come up with folks that sell jewellery or won't sell to me in Canada. Thanks, Ron
12 July 2009, 18:05
DMB
What are the dimensions of the piece you're looking for?
Most suppliers to the knife making trade sell horn in slabs. That's where I buy my horn.

Don




12 July 2009, 18:25
rgg_7
Minimum size I'm looking for is 1.25" x 1.25" x 1.75" length. Did check out several sites..some in USA and India. Looks like their selling to the jewellery and knife industry. Prefer a USA supplier of high quality black water buffalo for this project
12 July 2009, 22:06
tiggertate
Texas Knife Supply has whole horns pretty cheap. You'll have to cut out your own blank. Whether it has any streaks in it is a crap shoot. Jeff's Outfitters has some horn products. I know he had butt plates for sure. You might post this on the Austrailian forum too; they have some big-horned asiatic buffalo. Most of what is imported into the USA is the smaller variety and it's hard to get a large blank cut from one.


"Experience" is the only class you take where the exam comes before the lesson.
13 July 2009, 03:14
Juglansregia
I have several hundred water buff horns from Australia and could supply if you get stuck.

Getting the horn, whether whole or cut into appropriate blocks, through your customs would be something you would have to look into. Normally it would only be worth the hassle in bulk, but I have never sent any to Canada.

The material for gunstock use normally comes from the old cows, it is rare to get a bull with really solid tips, and those that have them have normally damaged them fighting.

PM me if you have no luck.
13 July 2009, 04:49
Mark
I wouldn't suggest this except as a way of getting around the shipping hassles, but have you tried calling up some local antique dealers and inquiring if they have any old horns?

You'll stink up your shop cutting one down to the size you need but it can be a way of finding horn and sometimes pretty cheap if the horn has a broken tip to begin with.


for every hour in front of the computer you should have 3 hours outside
13 July 2009, 05:00
D Humbarger
Here is an excellent source for horn, bone & ivory.
Boonetrading Company



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
14 July 2009, 08:05
Mike in Michigan
Tandy Leather dot com. Be sure to use a good respirator when working horn. You can get anthrax and other nasties from the dust.


Mike Ryan - Gunsmith