THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Stock for Model 600?
 Login/Join
 
one of us
posted
For those who asked on my trigger thread where my thread on the Model 600 stock options was, the answer is it's right here -- I am just now getting around to writing it! Roll Eyes

Anyway, I am looking for a lightweight stock for my Remington Model 600. I was looking at an H-S Precison drop-in, but 36 ounces is anything but light! I really don't know what my options are for a stock. I did manage to find one from High Tech Specialties which is Kevlar and foam that is 100-percent inletted for the Model 600. It weighs in at 18.5 ounces without paint and recoil pad.

Anybody know anything about this company and their product? Or any other company for that matter.

My plan is to have the rifle (.243) rebarelled by Hart to .358 Win. and then use it as a lightweight-heavy for moose and caribou in BC.
 
Posts: 1443 | Registered: 09 February 2004Reply With Quote
One of Us
posted Hide Post
Bansners are very good stocks. If oyu want a true liteweight, look at a McMillan with EDGE tech. I picked up my 600 mohawk in 257 bob yesterday. I had a McM mountain rifle with EDGE and it is a very nice stock. orht a look.
 
Posts: 276 | Location: MId-Michigan (back in the States) | Registered: 21 September 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
18.5 ounces is pretty light...you won't get much lighter without spending a lot more money...


make it up with aluminum rings


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
posted Hide Post
The "Hightech" stocks, thay I have used, are fine.
 
Posts: 868 | Location: maryland | Registered: 25 July 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia