I have a firing pin and cocking piece assembly for a M24 Mex Mauser, but no bolt body. The 1909 Peruvian and 1935 Argentine have the same bolt body lengths (6.165"), but each has a different firing pin length. And the M24 Yugo has a different bolt body length (6.115") than the M24 Mex (6.165"), but the firing pin OA length is close (7.24" vs 7.208")
Can I use any of these other intermediate bolt bodies in the M24 Mex with the M24 firing pin and receiver? Alternatively, could I use a fully assembled bolt body & firing pin from one of the other intermediates in the M24 Mex receiver?
Originally posted by Glen71: I'll try to remember to look at my Kuhnhausen book tonight and see if the info is there.
All the measurements I reference in my original post come from Kuhnhausen. There are differences in the lengths of bolt body/firing pins...just trying to understand my options.
