Anybody have any suggestions for mounting a recoil lug in a synthetic stock? I have used JB Weld before and it seems like pretty tough stuff I have also heard Devcon makes a liquid steel product. Any thoughts? Thanks

NorthSniper, the only difference between JB Weld and products like Steel Bed and an epoxy like Brownell's Acraglass is the looks and the cost. It is not metal, it is epoxy with metal filings. They say you can machine it, well you can the other epoxies too. You are looking for an epoxy glue, that is where the desirable characteristics come from, not from the sprinklings of metal dust incorporated into the matrix.

I have use a number of different ones in the past. Epoxy mend was a good one but they are out of business. MarineTex used to be good but it has so much junk filler in it that it has become brittle and lacks the strength of good epoxies.

i assume you mean to make the attachment point on the STOCK... devcon will be fine, as will any of the brownells products...

jb weld coudl do it, i guess, but ....

jeffe

I use Brownnells glass. I have never had good luck fixing any thing with JB weld always seems to brittle to me. If you want to do it right go with Brownnells bedding products.

I've used the Devcon epoxy puttys, doesn't run as much.

I've also used Microbed when I want to keep the appearance wood-like. good stuff.

Rob

Anybody know what the Devcon products name is? Devcon Liquid steel? Devcon liquid weld?

There is a difference in tensile and compressive strength among the various products out there [viz., Marine Tex, Acraglass, Devcon Plastic Steel, Devcon Titanium putty, etc.] The differences are not very much. And I don't know that they matter one bit in practical application. [I used to have the numbers, but no longer have them. You can do the research on the web yourself if you want to. It's pretty time consuming. The only product I absolutely could not find tensile and compressive strength numbers on was "Liquid Steel", the stuff that comes in two separate squeeze tubes, red and black in color].

The stuff with the best numbers I've seen [by quite aways] is Devcon Titanium putty, but it is expensive as heck. Devcon also makes a stainless steel putty. I am pretty sure Devcon supplies this to Brownell's, which then labels it as "Steel Bed" [and also marks up the price substantially]. The Devcon and Brownell products look and smell identical.

I don't think you can go wrong with any of the standard epoxys. I really like Devcon Plastic Steel in the two barrel syringe. It is very convenient. It is just a tad less viscous than I would like, but you can thicken it a bit with milled cotton, fiberglass fibers or powdered steel if you want [its really not necessary and it contains powdered steel anyway].

Everyone has a different opinion on what works best. Hope this helps.

Jordan

Whoops! The product I could not find data on [the one that comes in two tubes, red and black] was "JB Weld", not "Liquid Steel". See my post above for context.

Jordan