THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    where would one look for a spare set of winchetser 101 barrels

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
where would one look for a spare set of winchetser 101 barrels
 Login/Join
 
One of Us
Picture of Mike_Dettorre
posted
...besides the classifieds on AR...


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10134 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Id call Connecticut Shotgun Manufacturing Company and ask them. In addition to making shotguns, they carry a large assortment of fine shotguns, and a large assortment of parts because they also fix shotguns. They might not have what you want, but they could probably give you some ideas as to where to get what you want.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
There is a guy (or was a guy) in Calif who has a lot of 101 parts. I have bought a couple of stocks from him. He used to advertise in the GunList. Bought a brand new buttstock for a Win o/u in 30-06 from him. If he doesn't have it he might know who does as he was really knowledgable about 101's the times I spoke to him. Good Luck.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
Mike, it will cost you more than the value of the gun to have the barrels fitted. It is not a slam dunk that they will even fit. Some of the new shotguns like the K80's will interchange as they were made with CNC and are a perfect fit for barrels but not so with the 101.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Zimbabwe,

Was it Bolsa Gunsmithing


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10134 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
This guy might be able to help.

http://doublegunshop.com/showler.htm
 
Posts: 82 | Registered: 27 August 2004Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
Mike_Detorre,
That was not the name,but I got it from the GunList,I do remember that. It may have in fact been the Doublegun shop. Just been too long ago to remember and I can't find the paperwork. I just looked up the reference and it was formerly Eagle Trading in California. That doesn't sound like the name either but it was in California. I bought a Butstock for an o/u 30-06 and later a forearm for atrap combination set with regular double set and with single barrel. Was looking for a forearm for the single barrel.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Mike,

I've purchased alot of Winchester parts from Midwest Gun Works.

Good luck on finding a set of barrels.

http://www.midwestgunworks.com/merchant2/merchant.mvc?S...winchester-model-101


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
one of us
Picture of Will
posted Hide Post
When you find them ask about a set of Browning BSS 12 ga. barrels.


-------------------------------
Will Stewart / Once you've been amongst them, there is no such thing as too much gun.
---------------------------------------
and, God Bless John Wayne.

NRA Benefactor Member, GOA, N.A.G.R.
_________________________

"Elephant and Elephant Guns" $99 shipped
“Hunting Africa's Dangerous Game" $20 shipped.

red.dirt.elephant@gmail.com
_________________________

Hoping to wind up where elephant hunters go.
 
Posts: 19364 | Location: Ocala Flats | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    where would one look for a spare set of winchetser 101 barrels

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia