The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Rechamber Savage 24 .222 to .223?Go | New | Find | Notify | Tools | Reply | |
| Rechamber Savage 24 .222 to .223? | Login/Join |
one of us |
Is there a good reason why one could not rechamber a Savage Model 24-V in .222 to .223? I would think that all that is necessary is to run a finish reamer into the chamber to chase it out. Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | ||
|
One of Us |
There's nothing to gain except that the 223 is a tad cheaper to shoot. Other than that just do it!!!! Get a chamber reamer and have at it. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| one of us |
Vapodog: Thanks for the reply. My reason for doing so is because I already have a bunch of .223 ammo, plus everything to reload it. I can pick up a .222/20-gauge for about $300 and rechamber for about $40, but can not find a .223/20-gauge for less than $450.00. Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | |||
|
| One of Us |
Don't forget to change the stamp on the barrel to 223.....the next owner will be upset if you don't. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
A gunsmith once told me he prefered to cut a 222 barrel back a quarter inch just in case the chamber was oversize. By setting everything back he said the 223 reamer was sure to clean everything up. He was talking about bolt guns though. Doing this for the M24 might call for some extra gunsmithing. 'Spose a fella could try it and see if the 223/222 brass comes out with an extra shoulder, implementing the spendy remedy only if needed. | |||
|
| One of Us |
If there is any concern that the chamber won't completely clean up, the person doing such a conversion might be well advised to first cast and mike the chamber and compare it against the actual reamer before proceding. With a gun like the M24, you only get 1 shot at it (No pun intended)... | |||
|
| one of us |
Malm: Great suggestion. Thanks, Dave One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx | |||
|
one of us |
I have done that very thing to a Savage 340 for the cheaper and more availible ammo. | |||
|
| One of Us |
malm Pegged it. If your really have to have the .223 sell your gun and just buy one chambered in .223 your'll be lots of money ahead. | |||
|
| One of Us |
Or as that gunsmith told me, "You can handload a lot of 222 for the cost of the work you have in mind." | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Rechamber Savage 24 .222 to .223?
Visit our on-line store for AR Memorabilia