The Accurate Reloading Forums
Stock Refinishing

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/8681004732

14 December 2017, 17:49
BighornBreath
Stock Refinishing
Hello,

I have an old 870 shotgun with a gloss stock. I'm wanting to remove the gloss finish and turn it into a satin finish. I have no clue what to use or any useful tips. Can someone point me in the right direction? Thanks in advance.
14 December 2017, 19:52
craigster
16 pages worth.

http://forums.accuratereloadin...&forum_scope=9411043
15 December 2017, 10:07
montea6b
I've used Watco Danish oil finish, 400 grit wet/dry sand paper and a roll of paper towels and ended up with good results.
15 December 2017, 21:13
3584ELK
You could just leave the DuPont polyurethane intact, knock the glossiness down with some very fine Scotch Brite, or 1500 wet paper. That is the quick way out.


Merkel 140A- .470NE
Beretta Vittoria- 12 Ga.
J.P. Sauer & Sohn Type B- 9.3x64mm
ArmaLite AR-10A4- 7.62x51mm
Franchi Highlander- 12 Ga.
Marlin 1894 CB Limited- .41 Magnum
Remington 722- .244 Rem.
and many, many more.

An honest man learns to keep his horse saddled.