THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Mohawk 600 magazine size....???
 Login/Join
 
One of Us
posted
I have a 22-250, Mohawk600 that was rebarreled before I got it. It has a heavy fluted Remington barrel on it now..about 25 inches long. While this rifle shoots really well, it is awful to carry and the balance is horrible. I'm considering rebarreling it, and assumed that a 308 or 7mm08 would work fine...but found out that the 308 will not fit in the mag well properly...it works fine as a 22-250....

Were these 600's made with different size mags? I thought they would work with just about any of the .308 based cartridges... The way it looks right now, my options for rebarreling are pretty limited...

Z
 
Posts: 503 | Location: Arkansas Delta | Registered: 01 November 2004Reply With Quote
One of Us
posted Hide Post
Check to see if there is a spacer, I have 600 Mohaks in 223A!, 257 Bob and 7-08 and all feed fine.
 
Posts: 276 | Location: MId-Michigan (back in the States) | Registered: 21 September 2005Reply With Quote
One of Us
posted Hide Post
TMC...thanks...I had looked at that mag...but the spacer really is not very obvious...but on re-inspection I found it... Thanks! I needed that!!

ZBig Grin
 
Posts: 503 | Location: Arkansas Delta | Registered: 01 November 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia