The Accurate Reloading Forums
.30 to Mauser 98 action
16 October 2008, 17:48
igorrock.30 to Mauser 98 action
I have one .30 cal. barrel and one Mauser 98 LG action. I have noticed that there is none .30 caliber cartridge which goes to Mauser action and magazine without any gunsmith work. So I think there is time to do such kind of wildcat. What do you think ?
16 October 2008, 17:53
30 Caliber Mag Fanigorrock-
You could always do a .308 Winchester.
Great round and little if any modifications to the magazine box.
Good luck!!!
May the wind be in your face and the sun at your back.
P. Mark Stark
16 October 2008, 18:04
igorrockI have had one Mauser 308 but newer was happy with it. So I think 8x57 brass necked down to .30 bullet would be better idea. I'm sure that it works much better in 98 -action.
16 October 2008, 18:19
starmetalquote:
Originally posted by igorrock:
I have had one Mauser 308 but newer was happy with it. So I think 8x57 brass necked down to .30 bullet would be better idea. I'm sure that it works much better in 98 -action.
Your 8x57 necked down to 30 caliber sound pretty good. There is a "bastard" 30 caliber Mauser round and that is the 7.65x54 Argentine. It's equivalent to the 308 in power.
16 October 2008, 19:05
igorrockYes,it is quite near but bullet diameter is too big, same as 7,62x39 have. One main reason for this "wildcat" is large assortment of .30 bullets.
16 October 2008, 19:32
starmetalquote:
Originally posted by igorrock:
Yes,it is quite near but bullet diameter is too big, same as 7,62x39 have. One main reason for this "wildcat" is large assortment of .30 bullets.
On the 7.65x54 you just use a smaller expander plug on your sizer die. Once for a .308 bullet.
16 October 2008, 19:37
Rick RSounds like a worthy cartridge somewhere between the .308 and .30-06. Surely someone somewhere has done this in the past...
16 October 2008, 19:40
carcano91quote:
Originally posted by Rick R:
Sounds like a worthy cartridge somewhere between the .308 and .30-06.
7,5 x 54 French MAS and 7,5 x 55 SR Swiss. Both can be loaded with .308" bullets, naming convention and original military diamters notwithstanding.
Carcano
--
"Those who sacrifice liberty for security deserve neither."
"Is the world less safe now than before you declared your Holy war? You bet!"
(DUK asking Americans, 14th June 2004)
16 October 2008, 19:46
MasteriflemanI took a standard model 98 and barreled it to 9.3 X 62 M/M. That's only one M/M shorter than a .30-06 and I don't see why you couldn't do an '06 on it without having to alter the magazine. By the way, I don't have to shove 286 gr. bullets way into the case to make it fit. Loaded to the cannelure, they fit fine.
"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
16 October 2008, 19:51
idahoelk101someone please tell me this thread is a funny????? How many thousands of mauser 98s have been rebarreled to 30-06?
16 October 2008, 20:02
igorrockOf course you can load .30-06 so short that it goes to normal 98 magazine. But factory ammo with fmj -bullet is usually too long. I just sold my m98 .30-06 and it had magazine lengtened 4 mm (apr. 0,15 inch) which is just enough for .30-06.
16 October 2008, 21:10
bartsche
I throw in with the 7.5x54 MAS & the 7.65x53 Mauser with .308 dia expander. In a good Mauser the 7.5 MAS will out shine the .308 when properly hand loaded ( did it ).
roger
Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..