THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Squaring front reciever ring on M98?
 Login/Join
 
<chris_m>
posted
Is taking 0.100" off the reciever where it mates too the barrel too much to still be safe on a Mauser 98?

Regards,
Chris
 
Reply With Quote
D Humbarger
one of us
Picture of D Humbarger
posted Hide Post
Why .100? I rarely have to take more than .005 off.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
<chris_m>
posted
It is what the seller of this actio says that has been removed. Sounded way too much to me.
 
Reply With Quote
z1r
one of us
Picture of z1r
posted Hide Post
Are they by chance selling a K.Kale marked Turk action? If so, they had an integral lip that was meant to hold on the handguard. That lip is about .100". Once removed the overall length is the same as other LR Mausers.
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
Clark
one of us
posted Hide Post
When I take enough off the ring to get it smoothe, and then just lap the inner stop ring, then the distance between the two is less than .625", so the barrel shoulder to breech must be adjusted.
 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia