THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Who can convert a Rem M870 bbl to a M58?
 Login/Join
 
one of us
posted
We have a model 58 Remington Sportsman 12 ga. in the shop for repair. Apparently at some point in the past the extractor adjustment bolster was ground down allowing the extractor to pitch further inboard. Perhaps to correct an extraction issue really caused by a rusted chamber. This positioning of the extractor caused the tip to impact the breach at the extractor slot. Eventually chipping out a piece of the chamber rendering the barrel useless. I seem to recall a Rem 870 bbl can be modified by drilling gas holes in the bbl ring. Anyone here that can do that? Our shop policy does not allow it even though we feel capable. The gun is in otherwise great shape considering age. We would refer you to our customer.

Thanks, Bob

www.rustblue.com
 
Posts: 3822 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
you should be able to buy a replacement bbl here - http://www.barrelexchange.com/...on&ga=&Submit=Search


Also, I think Ahlmann's does the conversion.
 
Posts: 1070 | Registered: 02 April 2008Reply With Quote
one of us
posted Hide Post
Thanks, I'll forward that link.

Bob
 
Posts: 3822 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia